
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X30SBCBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 30mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X30SBCBT is a double-acting JIS compact cylinder engineered for tight axial spaces. It generates 981.8 N of push force and 824.6 N of pull force at 0.5 MPa, utilizing a hard-anodized 50 mm bore and a 20 mm piston rod. The integrated C-clip and riveted piston-to-rod assembly drastically reduce overall length compared to standard round-body units, saving valuable machine footprint depth.
This specific configuration includes a built-in piston magnet (-S) compatible with AirTAC reed or electronic solid-state switches via grooves around the body. It features a male-thread rod end (-B, M18x1.5) for direct load coupling and a CB mounting bracket for pivot applications. Deceleration is handled by a fixed NBR elastomer bumper at each end, which is not field-adjustable, so high-speed cycles may require external shock absorbers. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X30SBCBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the folding mechanism on continuous-motion carton erectors where the short 30 mm stroke rapidly opens flaps at 981.8 N push force without extending past the machine guard.
Pivots a lane diverting gate using the CB mounting bracket, leveraging the male M18x1.5 rod thread to securely link the pivot arm and redirect heavy product flow.
Ejects stamped metal parts from a hydraulic press bed, utilizing the integrated magnet with a solid-state switch to confirm retraction before the next press cycle begins.
When sizing this 50 mm bore, stepping down to a 40 mm cylinder yields 628.3 N push at 0.5 MPa, while stepping up to a 63 mm bore provides 1558.6 N push at 0.5 MPa, giving you a clear force gradient for your 30 mm stroke requirement. Keep in mind that a standard ACQ body does not hold its position or load if air pressure drops or the valve is centered; the rod will drift, and the fixed bumper only decelerates near the stroke end. For a fail-safe hold, an external rod lock or pilot-operated check valve is required.
To order this exact unit, confirm the 50 mm bore, 30 mm stroke, NPT1/4 port, male M18x1.5 rod thread, CB pivot bracket, and the integrated magnet for sensor tracking.
Quick checklist
This 50 mm bore double-acting cylinder provides 981.8 N push and 824.6 N pull at 0.5 MPa, 1374.4 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa with a speed range of 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end to absorb the stop energy; this is not an adjustable air cushion, so for high kinetic energy loads you should slow the approach or add an external shock absorber. The -S magnet allows tracking by AirTAC reed or electronic switches mounted in the body grooves.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.