verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACQ Series · JIS Compact Cylinder

Airtac ACQ Ultra Thin Air Cylinder ACQ50X30SBT

The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X30SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 30mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.

  • BoreØ50 mm
  • Stroke30 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM10×1.5 (F) / M18×1.5 (B)
  • ConfigurationStandard compact
$61.98 $69.48Save 10% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACQ50 stroke, mounting and version on one page All ACQ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACQ Ultra Thin Air Cylinder ACQ50X30SBT

The AirTAC ACQ50X30SBT is a double-acting JIS compact cylinder engineered for space-constrained machinery, delivering a robust 981.8 N push force at 0.5 MPa. Its short C-clip and riveted body design significantly reduces axial mounting depth compared to traditional round-body units. This specific configuration includes a built-in piston magnet and a male M18x1.5 threaded rod end for direct mechanical coupling.

This 50 mm bore unit features a 20 mm piston rod and a NPT1/4 port. Instead of an adjustable air cushion, it relies on a fixed NBR elastomer bumper at each end to absorb end-stop energy. The integrated magnet enables position detection via AirTAC reed or electronic switches seated in the body grooves, supporting operational speeds of 30-500 mm/s. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac ACQ Ultra Thin Air Cylinder ACQ50X30SBT Technical Specifications

ModelAirtac ACQ Ultra Thin Air Cylinder ACQ50X30SBT
SeriesACQ JIS compact (thin) cylinder
Bore sizeØ50 mm
Stroke30 mm
Acting typeDouble acting
Port sizePT1/4
Rod end threadM10×1.5 female / M18×1.5 male (B)
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionBumper (both ends)
Max standard strokeUp to 100 mm

Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac ACQ Ultra Thin Air Cylinder ACQ50X30SBT

ACQJIS compact (thin) double-acting cylinder series.
50Bore size in mm.
×30Stroke length in mm.
SBuilt-in magnet for magnetic-switch position sensing (omit = no magnet).
BMale-thread piston rod (omit = female-thread rod).

Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).

Where the Airtac ACQ Ultra Thin Air Cylinder ACQ50X30SBT Is Used

precision_manufacturing

CNC Fixture Clamping

Secures heavy aluminum castings onto machining centers using the 981.8 N extend force, with the male M18x1.5 rod threading directly into custom jaw fixtures.

package_2

Corrugated Box Flap Folding

Drives mechanical arms to fold heavy cardboard flaps on automated packaging lines, where the 30 mm stroke provides rapid and precise movement.

conveyor_belt

Pallet Diverting Arms

Actuates routing gates on conveyor networks, utilizing the integrated magnet with electronic switches to confirm gate positioning for logistics sorting.

Is the Airtac ACQ Ultra Thin Air Cylinder ACQ50X30SBT the Right Cylinder?

When sizing this model, consider stepping down to the 40 mm bore if your application requires less force, which provides 628.3 N push at 0.5 MPa. Conversely, if you need greater thrust, the 63 mm bore offers 1558.6 N push at 0.5 MPa. The ACQ50X30SBT is specified with a 50 mm bore, 30 mm stroke, NPT1/4 port, male M18x1.5 rod thread, and an integrated sensor magnet.

Be aware that a standard compact cylinder like this does not inherently hold its position if air pressure is lost or the directional valve is centered. The piston will drift, and the fixed NBR bumper only decelerates the motion near the stroke endpoints rather than locking the load. For fail-safe position holding, an external rod lock or pilot-operated check valve must be incorporated into your pneumatic circuit.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short-body depth vs. a round-body cylinder
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (S) for sensors?
  • ✓ Female (blank) or male (B) rod thread
  • ✓ Side load — avoid on a compact rod
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the short piston rod.
  • check Very long strokes are unsuitable for the compact body.
  • check Handle the C-clip carefully; seat it fully in its groove.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACQ Ultra Thin Air Cylinder ACQ50X30SBT FAQ

This 50 mm bore double-acting cylinder generates 981.8 N push and 824.6 N pull at 0.5 MPa, and 1374.4 N push at 0.7 MPa. The maximum push force is 200 kgf at 1.0 MPa. It operates at pressures from 0.15-1.0 MPa, with a speed range of 30-500 mm/s.

No, the ACQ50X30SBT uses a fixed NBR elastomer bumper at each end rather than an adjustable air cushion. For high-speed or high-energy cycles, you should slow the approach speed or install an external shock absorber to prevent end-cap damage.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC ACQ Compact Cylinders

Request a Quote for Airtac ACQ Ultra Thin Air Cylinder ACQ50X30SBT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACQ50X30SBT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.