
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X30ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 30mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X30ST is a double-acting JIS compact air cylinder engineered to save axial mounting depth. A riveted piston-to-rod assembly and C-clip secured body yield an exceptionally short overall length compared to round-body alternatives. Delivering 981.8 N of push force at 0.5 MPa, this 50 mm bore unit is built for rigorous actuation tasks.
This specific configuration includes a built-in piston magnet (-S) compatible with AirTAC reed or electronic switches fitted into the body's peripheral slots. The 20 mm piston rod utilizes a standard female M10x1.5 thread end. End-of-stroke energy is managed by a fixed NBR elastomer bumper rather than an adjustable cushion, meaning high-speed applications may require external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X30ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the sliding interlock gates on palletizer infeed conveyors, utilizing the 981.8 N push force to overcome guide friction and hold heavy barrier panels securely during pallet transit.
Actuates the mechanical flap-folding arms on case erectors, delivering rapid 30 mm strokes to tuck heavy cardboard flaps at cycle speeds well within the 30-500 mm/s operating range.
Mounts flush on injection molding machine platens to actuate secondary part ejector pins, saving axial depth while using the integrated magnet for solid-state switch position confirmation.
Selecting this 50 mm bore provides 981.8 N push and 824.6 N pull at 0.5 MPa. If you need less force, stepping down to the 40 mm bore yields 628.3 N push, while moving up to the 63 mm bore increases output to 1558.6 N push. Ensure your ordering essentials match this exact spec: 50 mm bore, 30 mm stroke, NPT1/4 port, female M10x1.5 rod thread, and the required sensor magnet.
Note that a plain compact cylinder like this cannot maintain a position if air pressure drops or the directional valve centers; the rod will drift. The fixed NBR bumper only decelerates the piston near stroke limits rather than locking it. To secure a suspended load safely, incorporate an external rod lock or a pilot-operated check valve into your circuit.
Quick checklist
This 50 mm bore double-acting cylinder provides 981.8 N push and 824.6 N pull at 0.5 MPa, 1374.4 N push at 0.7 MPa, with a maximum push capacity of 200 kgf at 1.0 MPa.
It relies on a fixed NBR elastomer bumper at each end to absorb shock, which is not field-adjustable; high energy loads may need external shock absorbers. It does not hold position on air loss, so an external rod lock is needed for fail-safe load holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.