
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X30T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 30mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X30T is a double-acting JIS compact cylinder engineered to deliver 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. Its C-clip and riveted piston-to-rod assembly drastically reduce the overall axial footprint compared to traditional round-body units, making it highly effective for machinery where mounting depth is restricted. The 50 mm bore features a hard-anodized inner wall to minimize friction and extend seal life.
This specific model utilizes a 20 mm piston rod with a female M10x1.5 thread end and a NPT1/4 port. Deceleration at the stroke extremes is handled by fixed NBR elastomer bumpers rather than an adjustable air cushion, meaning operators should slow the approach or utilize external shock absorbers for high-energy loads. The body includes integrated magnetic-switch grooves, though this particular unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X30T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the folding mechanism on packaging lines to close corrugated carton flaps, utilizing the 981.8 N extend force to overcome cardboard resistance within a tight machine frame.
Actuates routing gates on a conveyor system to redirect heavy pallets, relying on the 20 mm rod diameter to withstand lateral impacts during the sorting process.
Provides a compact secondary ejection push on an injection molding cell, where the short C-clip body length saves valuable axial space inside the press enclosure.
When sizing this 50 mm bore actuator, consider stepping down to the 40 mm version if your load requires less effort, which yields 628.3 N of push at 0.5 MPa. Conversely, if your application demands greater thrust, stepping up to the 63 mm bore provides 1558.6 N of push at 0.5 MPa. The 50 mm bore supports standard strokes up to 100 mm, with a long-stroke range extending to 300 mm available for greater travel requirements.
To finalize your order, verify the 30 mm stroke, the NPT1/4 port size, and the female M10x1.5 rod-end thread. Because this is a standard double-acting cylinder, it will not hold a load if air pressure drops or the valve is centered—the piston will drift, and the fixed NBR bumper only decelerates it near the end of the stroke. For fail-safe positioning, an external rod lock or pilot-operated check valve is required.
Quick checklist
At 0.5 MPa, the push force is 981.8 N and the pull force is 824.6 N. At 0.7 MPa, the push force reaches 1374.4 N. The maximum push force is 200 kgf at 1.0 MPa. Operating pressure ranges from 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
Cushioning is provided by fixed NBR elastomer bumpers at both ends and cannot be adjusted; for high kinetic energy loads, add external shock absorbers. While the body has grooves for reed or electronic switches, this specific model does not include the internal magnet, so sensors will not function without selecting the -S option.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.