
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X35BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 35mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X35BT is a double-acting JIS compact cylinder engineered to deliver 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. Its short C-clip and riveted piston-to-rod assembly drastically reduce overall axial length compared to traditional round-body units, saving valuable mounting depth in tight machinery layouts.
This specific configuration includes the -B option, providing a male M18x1.5 thread on the 20 mm piston rod for direct, secure load coupling. Deceleration is handled by a fixed NBR elastomer bumper at each end rather than an adjustable cushion, and while the body features integrated sensor grooves, this unit ships without a magnet for position detection. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X35BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the folding mechanisms on automated case erectors, utilizing the 981.8 N push force to form heavy corrugated board reliably.
Uses the male M18x1.5 rod end to securely attach a custom gripper plate, pulling finished plastic parts out of a molding press.
Actuates a routing flap on a packaging conveyor, leveraging the short 35 mm stroke to redirect boxes at high cycling speeds.
When sizing your drive, consider stepping down to the 40 mm bore (628.3 N push at 0.5 MPa) for lighter duties, or moving up to the 63 mm bore (1558.6 N push at 0.5 MPa) for heavier loads. To finalize this ACQ50X35BT build, confirm the 50 mm bore, 35 mm stroke, NPT1/4 port, and the male M18x1.5 threaded rod end.
Keep in mind that a standard compact cylinder does not hold its position if air pressure is lost or the control valve is centered; the rod will drift. If your application requires fail-safe load holding, you must integrate an external rod lock or a pilot-operated check valve into the pneumatic circuit.
Quick checklist
At 0.5 MPa, this double-acting cylinder provides 981.8 N of push force and 824.6 N of pull force. At 0.7 MPa, the push force reaches 1374.4 N. The maximum push force is 200 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa, with a speed range of 30-500 mm/s and an ambient temperature of -20 to +70 C.
No, the ACQ50X35BT uses fixed NBR elastomer bumpers at the stroke ends to absorb impact energy. It does not have an adjustable air cushion. For high kinetic energy loads or fast cycling, you should slow the approach speed or mount an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.