
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X35SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 35mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X35SBT is a double-acting JIS compact cylinder engineered to deliver 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body design significantly reduces axial mounting depth compared to round-body alternatives, saving valuable machine footprint space in tight assemblies.
This specific configuration includes a built-in piston magnet (-S) for use with AirTAC reed or electronic switches, and a male M18x1.5 thread rod end (-B) that couples directly to your load. Deceleration is handled by a fixed NBR elastomer bumper at each end, which is not an adjustable air cushion, so high-energy cycles may require an external shock absorber. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X35SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 981.8 N push stroke needed to fold corrugated cardboard flaps on a continuous packaging line, where the compact body depth keeps the conveyor framing clear.
Slides a heavy machine tool safety door with positive extension force, utilizing the male M18x1.5 thread for a rigid direct coupling to the guard panel.
Actuates a routing flap on a conveyor to divert heavy wooden pallets, relying on the fixed NBR bumper to absorb the 35 mm stroke impact without external adjustments.
When sizing this 50 mm bore, stepping down to a 40 mm bore yields 628.3 N push at 0.5 MPa, while stepping up to a 63 mm bore provides 1558.6 N push at 0.5 MPa, giving you clear scaling options for your force requirements. To finalize your build, confirm the 50 mm bore, 35 mm stroke, NPT1/4 port, male M18x1.5 rod thread, and the integrated magnet.
Note that a plain ACQ-type cylinder does not hold its position if air pressure is lost or the valve is centered; the piston will drift, and the fixed NBR bumper only decelerates it near the stroke end. If your application requires a fail-safe load hold, you must add an external rod lock or a pilot-operated check valve.
Quick checklist
This 50 mm bore double-acting cylinder provides 981.8 N push and 824.6 N pull at 0.5 MPa, 1374.4 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It features a 20 mm rod, a NPT1/4 port, and a male M18x1.5 rod-end thread.
It uses a fixed NBR elastomer bumper at each end to absorb the stop impact; this is not a field-adjustable air cushion, so high-speed applications may need an external shock absorber. Additionally, it does not hold its load on air loss—the piston drifts, requiring an external rod lock for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.