
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X35ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 35mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X35ST is a double-acting JIS compact cylinder engineered for space-constrained pneumatic setups. It delivers a robust 981.8 N push force at 0.5 MPa (1374.4 N at 0.7 MPa) utilizing a 50 mm bore and a 20 mm piston rod. The integrated C-clip and riveted piston-to-rod assembly drastically reduce overall axial length, saving valuable machine footprint depth compared to traditional round-body units.
This specific configuration includes the -S option, meaning it has a built-in piston magnet designed to interface seamlessly with AirTAC magnetic reed or electronic solid-state switches housed in the body's peripheral grooves. Deceleration at the stroke extremes is handled by fixed NBR elastomer bumpers rather than adjustable air cushions, ensuring reliable end-stop absorption for this 35 mm stroke model. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X35ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the folding mechanism on continuous carton erectors, using the 35 mm stroke to rapidly close cardboard flaps before adhesive application.
Actuates a sorting diverter arm on package handling conveyors, leveraging the 981.8 N push force to reliably redirect heavy parcels.
Secures aluminum engine blocks inside CNC machining centers, where the short body depth maximizes the usable work envelope.
When sizing your pneumatics, compare this 50 mm bore offering (981.8 N push @0.5 MPa) against the adjacent options: stepping down to a 40 mm bore yields 628.3 N push, while stepping up to a 63 mm bore provides 1558.6 N push. This ACQ50X35ST is configured with a NPT1/4 port, a default female M10x1.5 rod-end thread, and the essential -S magnet for position sensing. Remember that a standard compact cylinder does not hold its load if air pressure drops or the valve centers; the piston will drift, so an external rod lock or pilot-operated check valve is necessary for fail-safe position holding.
Quick checklist
This double-acting 50 mm bore cylinder provides a push force of 981.8 N and a pull force of 824.6 N at 0.5 MPa. At 0.7 MPa, the push force is 1374.4 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The stroke is 35 mm, and the maximum standard stroke available for this bore is 100 mm.
It uses fixed NBR elastomer bumpers at both ends to absorb the end stop; this is not an adjustable air cushion, so high-speed applications may need external shock absorption. The -S option equips the piston with a magnet for use with AirTAC reed or electronic switches mounted in the body grooves.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.