
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X35T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 35mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X35T is a double-acting JIS compact cylinder engineered for space-constrained pneumatic setups. Utilizing a riveted piston-to-rod assembly and C-clip secured covers, the body profile is drastically shortened compared to traditional round-body units. At 50 mm bore, it generates 981.8 N of push force and 824.6 N of pull force at 0.5 MPa, making it well-suited for substantial actuation tasks within a tight machine footprint.
This specific configuration features a 20 mm piston rod and a NPT1/4 supply port. Instead of an adjustable air cushion, it relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact. The barrel incorporates integrated magnetic-switch grooves, though this particular SKU ships without the internal magnet. Operating efficiently between 30 and 500 mm/s, it handles standard 35 mm travel demands reliably. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X35T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates routing gates on high-speed packaging conveyors, utilizing the 981.8 N extend force to push heavy cartons onto adjacent lanes.
Secures aluminum castings inside machining centers, where the short 35 mm stroke and compact C-clip body minimize interference with the cutting zone.
Raises lower-tier pallets in automated storage systems, relying on the 20 mm rod diameter to handle the upward dynamic load within the 0.15-1.0 MPa range.
Selecting the ACQ50X35T provides a robust middle-ground capacity for mid-tier automation. If your application requires slightly less force, stepping down to the 40 mm bore yields 628.3 N of push at 0.5 MPa. Conversely, upgrading to the 63 mm bore increases output to 1558.6 N at the same pressure. Keep in mind that a standard double-acting cylinder like this will drift if air pressure drops or the valve is centered; the NBR bumper only decelerates the piston near the stroke ends rather than locking the load. For fail-safe position holding, an external rod lock or pilot-operated check valve is necessary.
When ordering, verify this model's core attributes: a 50 mm bore, 35 mm stroke, NPT1/4 port thread, and a female M10x1.5 rod-end thread. Because this unit lacks the internal magnet (non-S code), position sensing requires adding a separate switch bracket or upgrading to an ACQ50X35S variant.
Quick checklist
The ACQ50X35T generates a push force of 981.8 N and a pull force of 824.6 N at 0.5 MPa. At 0.7 MPa, the push force is 1374.4 N, with a maximum push capacity of 200 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, handles temperatures from -20 to +70 C, and runs at speeds of 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end to absorb shock, which is not an adjustable air cushion; for high-energy cycles, you should slow the approach or add external shock absorbers. While the body features grooves for reed or electronic switches, this specific model ships without the internal magnet, so sensing is not supported unless upgraded to the S variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.