
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X40BLBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 40mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X40BLBT is a double-acting JIS compact cylinder engineered to deliver 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body construction significantly reduces axial length compared to round-body units, saving valuable mounting depth in tight machinery layouts.
This specific configuration includes a male M18x1.5 thread on the Ø20 mm piston rod for direct load coupling, alongside an LB mounting bracket for rigid attachment. The bore is hard-anodized for wear resistance, and the ends rely on a fixed NBR elastomer bumper rather than an adjustable air cushion. Sensor grooves are present around the body, though this unit ships without a magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X40BLBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the mechanical flap-closing arms on continuous-motion carton erectors where 981.8 N of extend force securely folds heavy corrugated board.
Actuates heavy-duty routing gates on roller conveyors, using the 40 mm stroke and LB mount to pivot diverter arms firmly into place.
Serves as a compact mold-ejection assist on mid-tonnage injection presses, leveraging the male M18x1.5 thread for rigid coupling to the ejector plate.
When sizing this 50 mm bore, stepping down to a Ø40 bore yields 628.3 N push at 0.5 MPa, while stepping up to a Ø63 bore provides 1558.6 N push. The ACQ50X40BLBT operates at 30-500 mm/s with a NPT1/4 port. Keep in mind that a plain ACQ body does not hold its position if air pressure drops; the rod drifts and the fixed NBR bumper only decelerates near the stroke end. For fail-safe load holding, specify an external rod lock or pilot-operated check valve. Confirm your ordering essentials: 50 mm bore, 40 mm stroke, LB bracket, male M18x1.5 rod thread, and no magnet.
Quick checklist
The ACQ50X40BLBT generates 981.8 N push and 824.6 N pull at 0.5 MPa, 1374.4 N push at 0.7 MPa, with a maximum push capacity of 200 kgf at 1.0 MPa. Operating pressure spans 0.15-1.0 MPa.
This model uses a fixed NBR elastomer bumper at each end, not an adjustable air cushion; for high kinetic energy loads, slow the approach or add an external shock absorber. While the body features sensor grooves, this specific unit lacks the internal magnet, so you cannot mount reed or electronic switches without modifying the configuration.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.