
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X40BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 40mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X40BT is a double-acting JIS compact cylinder engineered with a short C-clip and riveted body structure. This design significantly reduces axial mounting depth compared to round-body alternatives, freeing up valuable machine footprint space. Operating at 0.5 MPa, it provides 981.8 N of push force and 824.6 N of pull force.
This specific model features a 20 mm piston rod with a male M18x1.5 thread end for direct load coupling. Deceleration relies on a fixed NBR elastomer bumper at each end rather than an adjustable air cushion. The body includes sensor grooves for position detection, though this particular unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X40BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the mechanical flap folding arms on automated carton erectors, utilizing the 40 mm stroke to cleanly tuck side panels before sealing.
Pushes pallets onto secondary transfer lines using the 981.8 N extend force, with the male M18x1.5 thread providing a rigid mount for the contact pad.
Applies steady downward pressure to seat bearings into housings, relying on the NBR bumper to soften the end stop impact.
When sizing this 50 mm bore actuator, consider stepping down to the 40 mm bore for lighter duties (628.3 N push at 0.5 MPa) or up to the 63 mm bore for heavier tasks (1558.6 N push at 0.5 MPa). Keep in mind that a standard ACQ body does not hold its load if air pressure drops or the valve centers; the piston will drift. For fail-safe vertical positioning, an external rod lock or pilot-operated check valve is required. To order, confirm the 50 mm bore, 40 mm stroke, NPT1/4 port, male M18x1.5 rod thread, and no magnet.
Quick checklist
At 0.5 MPa, the push force is 981.8 N and the pull force is 824.6 N. At 0.7 MPa, the push force reaches 1374.4 N. The maximum push force is 200 kgf at 1.0 MPa. The maximum standard stroke for this 50 mm bore is 100 mm.
This model includes a male M18x1.5 thread on the 20 mm rod for direct load coupling. It uses fixed NBR elastomer bumpers at the stroke ends, not an adjustable air cushion, so high-speed applications may need external shock absorption.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.