verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC ACQ Series · JIS Compact Cylinder

Airtac ACQ Ultra Thin Air Cylinder ACQ50X40LBT

The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X40LBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 40mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.

  • BoreØ50 mm
  • Stroke40 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM10×1.5 (F) / M18×1.5 (B)
  • ConfigurationStandard compact
$48.82 $56.32Save 13% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACQ50 stroke, mounting and version on one page All ACQ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACQ Ultra Thin Air Cylinder ACQ50X40LBT

The AirTAC ACQ50X40LBT is a double-acting JIS compact cylinder engineered to deliver 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body design drastically reduces axial footprint compared to traditional round-body alternatives, making it highly effective for machinery where mounting depth is restricted. This specific configuration includes an LB mounting bracket for rigid lateral attachment.

This 50 mm bore unit features a 20 mm piston rod and a NPT1/4 port. It relies on a fixed NBR elastomer bumper at each end to absorb end-of-stroke impacts rather than an adjustable air cushion, meaning high-energy cycles may require external shock absorption or a slowed approach. The body retains magnetic-switch grooves, but this SKU ships without the internal magnet, and the rod end utilizes a standard female M10x1.5 thread. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac ACQ Ultra Thin Air Cylinder ACQ50X40LBT Technical Specifications

ModelAirtac ACQ Ultra Thin Air Cylinder ACQ50X40LBT
SeriesACQ JIS compact (thin) cylinder
Bore sizeØ50 mm
Stroke40 mm
Acting typeDouble acting
Port sizePT1/4
Rod end threadM10×1.5 female / M18×1.5 male (B)
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionBumper (both ends)
Max standard strokeUp to 100 mm

Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac ACQ Ultra Thin Air Cylinder ACQ50X40LBT

ACQJIS compact (thin) double-acting cylinder series.
50Bore size in mm.
×40Stroke length in mm.
SBuilt-in magnet for magnetic-switch position sensing (omit = no magnet).
BMale-thread piston rod (omit = female-thread rod).

Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).

Where the Airtac ACQ Ultra Thin Air Cylinder ACQ50X40LBT Is Used

straighten

Injection Mold Ejection

Provides 981.8 N of extend force at 0.5 MPa to eject molded plastic parts from tooling cavities where a short body profile keeps the actuator clear of the press tie-bars.

conveyor_belt

Pallet Diverting Gate

Uses the LB bracket to rigidly mount a routing gate on a packaging line, deflecting heavy cardboard cartons with 1374.4 N of push force available at 0.7 MPa.

factory

Bearing Press Fit

Presses bronze bearings into housings on an automated assembly dial, relying on the 20 mm rod and female M10x1.5 thread to secure the tooling without side-loading the compact piston.

Is the Airtac ACQ Ultra Thin Air Cylinder ACQ50X40LBT the Right Cylinder?

When sizing this actuator, consider stepping down to the 40 mm bore if your application only requires 628.3 N of push at 0.5 MPa, or moving up to the 63 mm bore for a substantial increase to 1558.6 N. Keep in mind that a standard ACQ body does not hold its load if air pressure drops or the valve is centered; the piston will drift, and the fixed bumper only decelerates near the stroke end. For fail-safe positioning, integrate an external rod lock or a pilot-operated check valve.

To finalize your order, confirm the 50 mm bore, 40 mm stroke, NPT1/4 port, and the LB mounting bracket. This model uses the default female M10x1.5 rod thread and lacks the internal sensor magnet, operating effectively at speeds between 30 and 500 mm/s.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short-body depth vs. a round-body cylinder
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (S) for sensors?
  • ✓ Female (blank) or male (B) rod thread
  • ✓ Side load — avoid on a compact rod
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the short piston rod.
  • check Very long strokes are unsuitable for the compact body.
  • check Handle the C-clip carefully; seat it fully in its groove.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACQ Ultra Thin Air Cylinder ACQ50X40LBT FAQ

This 50 mm bore double-acting cylinder provides a push force of 981.8 N and a pull force of 824.6 N at 0.5 MPa, and 1374.4 N of push at 0.7 MPa. The maximum push force is 200 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, with a speed range of 30-500 mm/s.

It uses a fixed NBR elastomer bumper at each end to absorb shocks, which is not an adjustable air cushion, so high-speed applications may need external shock absorbers. Additionally, it does not hold its load if air is lost; the rod drifts, requiring an external rod lock for fail-safe positioning.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC ACQ Compact Cylinders

Request a Quote for Airtac ACQ Ultra Thin Air Cylinder ACQ50X40LBT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACQ50X40LBT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.