
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X40SBCBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 40mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X40SBCBT is a double-acting JIS compact cylinder engineered for space-constrained pneumatics. It generates 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. The short C-clip and riveted piston-to-rod assembly drastically reduces overall axial length compared to round-body units, minimizing machine footprint depth.
This specific configuration includes a built-in magnet for AirTAC reed or electronic switches via body grooves, a male M18x1.5 threaded rod end for direct load coupling, and a CB mounting bracket. Deceleration relies on a fixed NBR elastomer bumper at each end rather than an adjustable air cushion, meaning high-energy cycles may need external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X40SBCBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 981.8 N push force required to snap corrugated packaging flaps into position on a continuous motion carton erector.
Acts as a robust 50 mm bore lane diverter stop on a 200 kg rated accumulation conveyor, using the CB bracket for rigid side mounting.
Secures cast aluminum engine blocks during CNC machining, utilizing the male M18x1.5 thread to attach a custom swing arm clamp.
When sizing this 50 mm bore, dropping down to a 40 mm unit yields 628.3 N push at 0.5 MPa, while stepping up to a 63 mm bore provides 1558.6 N. Remember that a standard ACQ body does not hold its load if air pressure drops or the valve centers; the piston will drift, so add an external rod lock or pilot-operated check valve for fail-safe positioning. To order this exact unit, confirm the 50 mm bore, 40 mm stroke, NPT1/4 port, S magnet, B male rod thread, and CB bracket.
Quick checklist
At 0.5 MPa it provides 981.8 N push and 824.6 N pull. At 0.7 MPa push is 1374.4 N. The maximum push force is 200 kgf at 1.0 MPa, with an operating speed range of 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end to absorb shock, which is not field adjustable. It also does not function as a brake; if air is lost, the rod drifts, requiring an external rod lock to hold a suspended load.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.