
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X40SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 40mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X40SBT is a double-acting JIS compact cylinder engineered to deliver substantial thrust within a minimal axial envelope. It generates 981.8 N of push force and 824.6 N of pull force at 0.5 MPa, making it well-suited for medium-duty industrial handling. The riveted piston-to-rod joint and C-clip body construction significantly reduce overall length compared to conventional round-body units.
This specific configuration includes a built-in piston magnet (-S) for position sensing and a male-thread rod end (-B). The M18x1.5 male thread allows direct mechanical coupling to tooling. End-of-stroke energy is managed by fixed NBR elastomer bumpers rather than adjustable air cushions, and the hard-anodized 50 mm bore ensures durable, low-friction operation over a 30-500 mm/s speed range. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X40SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates diverting arms on packaging lines to push heavy pallets, utilizing the 981.8 N extend force to overcome lateral friction reliably.
Extracts molded plastic parts from press cavities, where the male M18x1.5 thread securely mounts gripper fingers and the compact body saves valuable mold-base depth.
Secures heavy cast iron blocks inside CNC machining centers, taking advantage of the 200 kgf maximum thrust capacity for rigid workholding.
Selecting this 50 mm bore involves balancing force and spatial constraints. If your application requires less thrust, the adjacent 40 mm bore offers 628.3 N push at 0.5 MPa; conversely, stepping up to the 63 mm bore yields 1558.6 N push at 0.5 MPa. Keep in mind that a standard ACQ body will drift if air pressure is lost or the valve is centered, as the fixed NBR bumper only decelerates the piston near stroke end rather than locking it. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
When ordering, confirm the 50 mm bore, 40 mm stroke, and NPT1/4 port size. This ACQ50X40SBT variant includes the magnetic piston for use with AirTAC reed or electronic switches, and features the M18x1.5 male rod thread for direct load attachment.
Quick checklist
At 0.5 MPa, the push force is 981.8 N and the pull force is 824.6 N. At 0.7 MPa, the push force increases to 1374.4 N. The maximum push force is 200 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
There is no adjustable air cushion; the cylinder uses fixed NBR elastomer bumpers at both ends to absorb end-stop impact. For high kinetic energy loads, you should add an external shock absorber. The -B option means the 20 mm piston rod terminates in a male M18x1.5 thread for direct mounting of tooling or couplings.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.