
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X40ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 40mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X40ST is a double-acting JIS compact cylinder engineered to deliver 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body design significantly reduces axial mounting depth compared to traditional round-body units, making it highly effective for machinery where space is restricted. The 50 mm bore utilizes a 20 mm piston rod and a NPT1/4 port.
This specific model includes the S option, meaning it has a built-in piston magnet compatible with AirTAC reed or electronic switches via the grooves around the body. End-of-stroke energy is managed by a fixed NBR elastomer bumper rather than an adjustable cushion, so high-speed applications may require external shock absorption. The default female M10x1.5 rod-end thread provides a straightforward load coupling interface. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X40ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 981.8 N push force needed to reliably fold heavy cardboard flaps on automated packaging lines within a tight machine footprint.
Actuates heavy transfer gates on conveyor systems, utilizing the 40 mm stroke and fixed NBR bumper to absorb the stopping energy of moving loads.
Secures mid-weight cast iron blocks during machining operations, using the built-in S magnet to confirm clamp engagement to the PLC.
When sizing this 50 mm bore actuator, consider stepping down to the 40 mm bore if your application only requires 628.3 N of push force at 0.5 MPa, or stepping up to the 63 mm bore if you need a substantially higher 1558.6 N push. The ACQ50X40ST operates at pressures from 0.15-1.0 MPa with a speed range of 30-500 mm/s. Remember that a plain compact cylinder like this will drift and cannot hold a load if air pressure is lost or the valve is centered; a fail-safe hold requires an external rod lock or pilot-operated check valve. To order, confirm the 40 mm stroke, NPT1/4 port, female M10x1.5 rod thread, and the required S magnet option.
Quick checklist
At 0.5 MPa, the push force is 981.8 N and the pull force is 824.6 N. At 0.7 MPa, the push force is 1374.4 N. The maximum push force is 200 kgf at 1.0 MPa. The maximum standard stroke available for this 50 mm bore is 100 mm.
No, it uses a fixed NBR elastomer bumper at each end to absorb end-of-stroke impact. It is not an adjustable air cushion, so if you operate at high speeds or move heavy masses, you should slow the approach or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.