
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X40T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 40mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X40T is a double-acting, single-rod JIS compact cylinder engineered for tight axial spaces. It delivers 981.8 N of push force and 824.6 N of pull force at 0.5 MPa, driven by a 20 mm piston rod and a NPT1/4 port. The short C-clip and riveted piston-to-rod assembly drastically reduce overall length compared to round-body alternatives, saving valuable machine footprint.
Instead of an adjustable air cushion, this model relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact. The barrel features integrated magnetic-switch grooves, though this specific configuration ships without the sensor magnet. Operating efficiently between 30 and 500 mm/s, it is built for high-cycle automation where space is at a premium. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X40T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives folding mechanisms on case erecting lines, using its 40 mm stroke to cleanly tuck carton flaps before sealing at high cycling speeds.
Secures aluminum castings inside CNC machining centers, applying 981.8 N of extend force at 0.5 MPa to hold parts rigidly against cutting forces.
Actuates a pneumatic diverter arm on a bottle filling conveyor, pushing product into a secondary packaging lane without occupying excessive frame depth.
When sizing this 50 mm bore actuator, evaluate your force margins: stepping down to a 40 mm bore yields 628.3 N of push at 0.5 MPa, while stepping up to a 63 mm bore provides 1558.6 N. This ACQ50X40T configuration specifies a 40 mm stroke, a female M10x1.5 rod-end thread, and no sensor magnet. Keep in mind that a standard ACQ body does not inherently hold a load if air pressure drops or the valve is centred; the rod will drift, and the fixed bumper only decelerates near the stroke end. For fail-safe positioning, an external rod lock or pilot-operated check valve is required.
Quick checklist
At 0.5 MPa, the push force is 981.8 N and the pull force is 824.6 N. At 0.7 MPa, the push force is 1374.4 N. The maximum push force is 200 kgf at 1.0 MPa. Operating pressure ranges from 0.15 to 1.0 MPa, with a speed range of 30-500 mm/s.
No, the ACQ50X40T uses a fixed NBR elastomer bumper at each end to decelerate the piston. It is not a field-adjustable air cushion. For high kinetic energy loads, you should slow the approach speed or add an external shock absorber to prevent end-cap damage.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.