
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X45BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 45mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X45BT is a double-acting JIS compact cylinder engineered for tight axial mounting spaces. A C-clip and riveted piston-to-rod joint yield a very short overall body, saving machine depth versus a round-body unit. This 50 mm bore generates 981.8 N of push force and 824.6 N of pull force at 0.5 MPa.
This specific configuration features a male M18x1.5 thread on the Ø20 mm piston rod for direct load coupling. The bore is hard-anodized for longevity, and the cylinder relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact. It is not equipped with a sensor magnet, though the body retains magnetic-switch grooves for future sensing upgrades. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X45BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 981.8 N of extend force at 0.5 MPa to secure heavy cast iron housings inside CNC machining centers, utilizing the male M18x1.5 thread for a solid fixture attachment.
Actuates a routing gate on a 50 mm stroke to redirect heavy pallets along a packaging conveyor line, where the short compact body avoids frame interference.
Folds corrugated cardboard blanks at high cycle rates, relying on the fixed NBR bumper to decelerate the 45 mm stroke without requiring external adjustments.
When sizing this 50 mm bore actuator, compare its 981.8 N push at 0.5 MPa against adjacent options: the 40 mm bore provides 628.3 N for lighter duties, while the 63 mm bore offers 1558.6 N for heavier loads. Keep in mind that a standard ACQ body does not hold a load if air pressure drops or the valve is centered; the rod will drift. For fail-safe positioning, an external rod lock or pilot-operated check valve is required. To order this exact unit, confirm the 50 mm bore, 45 mm stroke, NPT1/4 port, male M18x1.5 rod thread, and no magnet.
Quick checklist
This 50 mm bore double-acting cylinder provides 981.8 N push and 824.6 N pull at 0.5 MPa, 1374.4 N push at 0.7 MPa, and a maximum push force of 200 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa with a speed range of 30-500 mm/s.
No. The ACQ50X45BT uses a fixed NBR elastomer bumper at each end, not a field-adjustable air cushion. Additionally, the cylinder does not lock or hold the load if air is lost; the piston drifts and the bumper only decelerates it near the stroke end. For position holding, use an external rod lock.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.