
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X45SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 45mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X45SBT is a double-acting JIS compact cylinder engineered to deliver 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. Its space-saving C-clip and riveted body design significantly reduces axial mounting depth compared to traditional round-body alternatives. This 50 mm bore unit features a 45 mm stroke and integrates a built-in piston magnet for position sensing.
Equipped with a male M18x1.5 threaded rod end, it couples directly to your mechanism with a 20 mm piston rod. The bore is hard-anodized for longevity, and the cylinder relies on fixed NBR elastomer bumpers at both ends to absorb end-stop impact. Note that this bumper is not an adjustable air cushion, so high-speed applications may require external shock absorbers. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X45SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 981.8 N push stroke needed to fold heavy cardboard flaps on continuous packaging lines, utilizing the 45 mm stroke to clear the machine frame during retraction.
Actuates a routing gate to redirect heavy pallets, where the male M18x1.5 rod end secures the linkage and the compact body fits within tight conveyor side-frame clearances.
Knocks out molded plastic components using the 824.6 N retract force, while the integrated magnet triggers an electronic switch to confirm part release before the mold closes.
When sizing this 981.8 N (at 0.5 MPa) unit, stepping down to a 40 mm bore yields 628.3 N of push force, while stepping up to a 63 mm bore provides 1558.6 N. This model includes the S option for a piston magnet compatible with AirTAC reed or electronic switches, and the B option for a male M18x1.5 rod thread. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
Remember that a standard compact cylinder like this does not hold its position if air pressure drops or the valve is centered; the rod will drift. If your application requires fail-safe load holding, you must add an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.5 MPa, the push force is 981.8 N and the pull force is 824.6 N. At 0.7 MPa, the push force is 1374.4 N. The maximum push force is 200 kgf at 1.0 MPa. Operating pressure ranges from 0.15-1.0 MPa, with a speed of 30-500 mm/s.
No, the ACQ50X45SBT uses fixed NBR elastomer bumpers at both ends to decelerate the piston. This is not a field-adjustable air cushion. For high kinetic energy loads, you should slow the approach speed or install an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.