
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X45ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 45mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X45ST is a double-acting JIS compact cylinder engineered to deliver substantial force in a minimal axial footprint. Utilizing a C-clip and riveted piston-to-rod assembly, this 50 mm bore model achieves a 981.8 N push and 824.6 N pull at 0.5 MPa, fitting seamlessly into tight machine layouts where round-body alternatives cannot.
This specific unit includes a built-in piston magnet (-S) for position detection via AirTAC reed or electronic switches seated in the body grooves. It features a 20 mm rod with a female M10x1.5 end thread, a NPT1/4 port, and relies on fixed NBR elastomer bumpers at both ends to absorb end-of-travel impacts rather than an adjustable cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X45ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the folding mechanism on medium-duty packaging lines, using the 981.8 N extend force to swiftly open and square corrugated carton blanks prior to tape sealing.
Actuates a routing diverter on a conveyor belt system, relying on the 45 mm stroke and 824.6 N retract force to pivot guide rails and redirect heavy product pallets.
Pushes finished stamped components out of a small press die, utilizing the 20 mm rod and female M10x1.5 thread to securely attach the ejection tooling.
When sizing this 50 mm bore actuator, stepping down to a 40 mm bore yields a 628.3 N push at 0.5 MPa, while stepping up to a 63 mm bore provides 1558.6 N of thrust at the same pressure. The ACQ50X45ST configuration confirms a 45 mm stroke, NPT1/4 porting, a female M10x1.5 rod thread, and the integrated magnet for switch mounting.
Keep in mind that a standard compact cylinder like this will drift and lose its position if air pressure drops or the directional valve is centered. The fixed NBR bumper only decelerates the piston near the stroke endpoints and does not function as a locking brake, so applications requiring fail-safe load holding will need an external rod lock or pilot-operated check valve.
Quick checklist
This 50 mm bore cylinder provides a push force of 981.8 N and a pull force of 824.6 N at 0.5 MPa. At 0.7 MPa, the push force is 1374.4 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The maximum standard stroke available for this bore size is 100 mm.
The integrated magnet (-S) is compatible with both AirTAC reed and electronic solid-state switches mounted in the body grooves. End-of-stroke impacts are absorbed by fixed NBR elastomer bumpers, which are not field-adjustable, so high-speed applications may require external shock absorbers.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.