
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X50BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 50mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X50BT is a double-acting JIS compact cylinder engineered for space-constrained pneumatics. Its short C-clip and riveted body significantly cut axial mounting depth compared to round-body units. At 0.5 MPa, it generates 981.8 N of push force and 824.6 N of pull force, extending to 1374.4 N at 0.7 MPa.
This specific configuration includes a male M18x1.5 rod-end thread for direct load coupling. The 20 mm piston rod moves within a hard-anodized barrel, while an integrated NBR bumper at each end manages end-stop impact. Note that this bumper is fixed, not an adjustable air cushion, so high-energy cycles may require external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X50BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the folding mechanism on continuous-motion carton erectors, using the 981.8 N push force to snap heavy corrugated flaps into position at speed.
Pushes runner strips away from injection molding platens where the short 50 mm stroke and male M18x1.5 thread provide rigid, direct ejection.
Actuates a diverter arm on a bottling line, swinging product into a side lane without consuming excessive longitudinal frame space.
When sizing this 50 mm bore, stepping down to a 40 mm bore yields 628.3 N push at 0.5 MPa, while stepping up to a 63 mm bore provides 1558.6 N push. Remember that a plain ACQ body does not hold its position if air pressure drops or the valve centers; the rod drifts, and the fixed NBR bumper only decelerates near the stroke end. For fail-safe holding, specify an external rod lock or pilot-operated check valve. To order this exact unit, confirm the 50 mm bore, 50 mm stroke, NPT1/4 port, male M18x1.5 rod thread, and no magnet.
Quick checklist
At 0.5 MPa, the push force is 981.8 N and the pull force is 824.6 N. At 0.7 MPa, the push force is 1374.4 N. The maximum push force is 200 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
Cushioning is handled by a fixed NBR bumper at each end, not an adjustable air cushion; for high-energy loads, slow the approach or use an external shock absorber. This model ships without a sensor magnet, though the body retains grooves for AirTAC reed or electronic switches if you later specify the -S option.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.