
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X50CBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 50mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X50CBT is a double-acting JIS compact cylinder engineered to deliver 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body design significantly reduce axial mounting depth compared to round-body alternatives, saving valuable machine footprint in tight assemblies.
This 50mm bore unit features a 20mm piston rod with a female M10x1.5 thread end and a NPT1/4 port. It relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable air cushion. The body includes sensor grooves for magnetic switches, though this specific SKU ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X50CBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 981.8 N of extend force to secure heavy cast iron engine blocks during multi-axis CNC machining operations.
Drives a 50mm stroke to fold and press corrugated carton flaps flat against the product line at high cycle rates.
Uses the CB bracket to rigidly mount a diverter arm that redirects heavy wooden pallets between parallel conveyor lanes.
When sizing your drive, consider stepping down to the 40mm bore (628.3 N push @0.5 MPa) for lighter loads, or up to the 63mm bore (1558.6 N push @0.5 MPa) if you need greater thrust. Ensure your ordering essentials match this configuration: 50mm bore, 50mm stroke, NPT1/4 port, female rod thread, and a CB mounting bracket.
Remember that a standard compact cylinder like this does not hold its position if air pressure drops or the valve is centered; the rod will drift. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
Quick checklist
This 50mm bore cylinder generates 981.8 N push and 824.6 N pull at 0.5 MPa, 1374.4 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. The operational speed range is 30-500 mm/s.
No, it uses fixed NBR elastomer bumpers at the stroke ends, not an adjustable air cushion. For high-energy impacts, slow the approach or use an external shock absorber. Additionally, it cannot hold a load without live air pressure; you must add an external rod lock for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.