
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X50SCBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 50mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X50SCBT is a double-acting JIS compact cylinder engineered for space-constrained pneumatic setups. Utilizing a riveted piston-to-rod assembly and C-clip secured covers, the short body architecture significantly reduces axial footprint compared to conventional round-body options. At 50 mm bore, it generates 981.8 N of push force and 824.6 N of pull force at 0.5 MPa.
This specific configuration includes a built-in piston magnet (-S) for position detection and a male-thread piston rod end (-B, M18x1.5) for secure mechanical load coupling. The NPT1/4 port supplies air to the hard-anodized aluminum barrel. Deceleration at stroke ends relies on fixed NBR elastomer bumpers rather than adjustable air cushions, keeping the overall length minimal while absorbing end-stop impact. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X50SCBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 981.8 N push force necessary to cleanly fold heavy corrugated cardboard flaps on high-speed packaging lines without consuming excessive machine depth.
Uses the male M18x1.5 rod thread to securely attach and slide the safety enclosure, while the CB mount allows rigid anchoring to the machine frame.
Acts as a robust pneumatic stop gate for incoming pallets, relying on the NBR fixed bumper to absorb the kinetic energy of the decelerating load.
Selecting this 50 mm bore model makes sense when your application requires roughly 981 N of thrust at 0.5 MPa. If you need less force, stepping down to the 40 mm bore yields 628.3 N of push, whereas stepping up to the 63 mm bore provides 1558.6 N. Remember that a standard ACQ body does not inherently hold a load if air pressure drops or the directional valve centers; the piston will drift, and the fixed bumper only decelerates it near the end of travel. For fail-safe vertical positioning, integrate an external rod lock or a pilot-operated check valve.
When ordering, verify your requirements against this unit's attributes: 50 mm bore, 50 mm stroke, NPT1/4 port thread, integrated magnet for reed or electronic switches, male M18x1.5 rod thread, and the CB mounting bracket interface. Operating speed spans 30-500 mm/s within a 0.15-1.0 MPa pressure range.
Quick checklist
This 50 mm bore double-acting cylinder provides a push force of 981.8 N and a pull force of 824.6 N at 0.5 MPa. At 0.7 MPa, the push force is 1374.4 N. The maximum push force is 200 kgf at 1.0 MPa. The maximum standard stroke available for this bore is 100 mm.
No, it uses fixed NBR elastomer bumpers at both ends to absorb end-stop shock, which cannot be field adjusted like a standard air cushion. It does include a built-in piston magnet (-S) for position detection, which is compatible with AirTAC reed or electronic switches mounted in the body grooves.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.