
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X50ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 50mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X50ST is a double-acting JIS compact air cylinder with a 50 mm bore and 50 mm stroke. A short C-clip and riveted piston-to-rod assembly shrinks the total axial length, fitting into tight machine footprints where a conventional round-body unit would bottom out. It delivers 981.8 N of push force and 824.6 N of pull force at 0.5 MPa, utilizing a 20 mm piston rod with a standard female M10x1.5 thread end.
Equipped with a built-in magnet (-S), the body features integrated grooves for mounting AirTAC reed or electronic solid-state switches. Deceleration at the stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-energy cycles may require an external shock absorber to prevent wear. Fluid supply connects via a NPT1/4 port, and operational velocity spans 30-500 mm/s. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X50ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the folding mechanism on continuous-motion carton erectors, using the 981.8 N push force to reliably crease and close heavy corrugated flaps at speed.
Actuates a routing diverter gate on a 50 mm stroke to shift heavy pallets between parallel conveyor lines without extending into the walking aisle.
Provides secondary part ejection from an injection molding press, saving axial depth behind the stationary platen while cleanly breaking small plastic parts free.
When sizing this 50 mm bore model, stepping down to a 40 mm bore drops the 0.5 MPa push force to 628.3 N, while stepping up to a 63 mm bore increases it to 1558.6 N. This 981.8 N class is ideal for medium-duty positioning, provided side loads are minimized on the compact rod. To finalize your order, confirm the 50 mm bore, 50 mm stroke, NPT1/4 port, female M10x1.5 rod thread, and the integrated -S magnet for sensors. Note that a plain compact cylinder drifts when air is removed or a valve is centered; an external rod lock or pilot-operated check valve is required for fail-safe load holding.
Quick checklist
This double-acting cylinder provides 981.8 N push and 824.6 N pull at 0.5 MPa, 1374.4 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. The maximum standard stroke for the 50 mm bore is 100 mm.
No, it uses a fixed NBR elastomer bumper at each end to absorb end-stop impact. It is not a field-adjustable cushion, so for high-speed or high-energy loads, you should slow the approach or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.