
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X5BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 5mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X5BT is a double-acting JIS compact cylinder engineered for minimal axial footprint, utilizing a C-clip and riveted piston-to-rod assembly to drastically reduce overall length compared to round-body alternatives. Delivering 981.8 N of push force at 0.5 MPa, it is built around a 50 mm bore with a very short 5 mm stroke for high-impact, small-displacement tasks.
This specific configuration includes a male M18x1.5 threaded piston rod end for direct, secure load coupling. The hard-anodized aluminum bore houses a fixed NBR elastomer bumper at each end to absorb end-stop energy rather than relying on an adjustable air cushion. While it lacks a built-in sensor magnet, the body retains peripheral grooves for adding AirTAC reed or electronic switches if position feedback becomes necessary later. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X5BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Uses the 981.8 N extend force and 5 mm stroke to rapidly kick small metal blanks out of a progressive die before the press cycles.
Drives a short mechanical arm to tuck corrugated box flaps on a continuous packaging line where axial depth is severely restricted.
Shoves machined aluminum parts off a conveyor belt into a collection chute using the male M18x1.5 rod end to thread directly into a custom pusher block.
Selecting this 50 mm bore involves balancing your force requirements; if you need less power, the 40 mm bore provides 628.3 N of push at 0.5 MPa, while stepping up to the 63 mm bore yields 1558.6 N. Keep in mind that a plain compact cylinder like this will drift and cannot hold a load if air pressure drops or the valve is centered—the fixed NBR bumper only decelerates the piston near the stroke end, so an external rod lock or pilot-operated check valve is required for fail-safe positioning.
When ordering, confirm the essentials for this model: a 50 mm bore, 5 mm stroke, NPT1/4 port, male M18x1.5 rod thread (B option), and no sensor magnet. Operating speed spans 30-500 mm/s, making it highly responsive for rapid repetitive motion.
Quick checklist
At 0.5 MPa, the push force is 981.8 N and the pull force is 824.6 N. At 0.7 MPa, the push force is 1374.4 N. The maximum push force is 200 kgf at the 1.0 MPa operating pressure limit. The maximum standard stroke available for this 50 mm bore is 100 mm.
The 'B' option indicates a male M18x1.5 threaded piston rod end, allowing you to thread a fixture directly onto the 20 mm diameter rod. It uses a fixed NBR elastomer bumper at each end to absorb shock, which is not an adjustable air cushion, so you should slow the approach or add external shock absorbers for high-energy loads.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.