
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X5SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 5mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X5SBT is a double-acting JIS compact cylinder engineered for short-stroke power transfer. It generates 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. The riveted C-clip body design significantly reduces axial length compared to round-body units, saving valuable machine footprint in tight assemblies.
Equipped with a built-in magnet (-S), the body accepts reed or electronic switches along its peripheral grooves. The male-thread rod end (-B, M18x1.5) couples directly to tooling, while the fixed NBR elastomer bumper absorbs end-stop impact. Note that this bumper decelerates the motion but is not an adjustable air cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X5SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides a compact 981.8 N punch to eject plastic parts from injection molding machines where axial depth is strictly limited.
Drives a male-threaded sealing head down 5 mm to fold and press carton flaps, utilizing the NBR bumper to soften the end stop.
Delivers high initial force to press alignment pins into machined housings on an automated assembly line without requiring a long stroke.
For a 50 mm bore, this 5 mm stroke unit provides massive thrust in a tiny footprint. If you need less force, the 40 mm bore yields 628.3 N push at 0.5 MPa; stepping up to the 63 mm bore provides 1558.6 N push. To confirm your ordering essentials: specify 50 mm bore, 5 mm stroke, NPT1/4 port, male M18x1.5 rod thread, and the magnetic piston. A plain cylinder drifts when air is lost, so add an external rod lock for fail-safe load holding.
Quick checklist
The ACQ50X5SBT (50 mm bore, double-acting) generates 981.8 N push and 824.6 N pull at 0.5 MPa, 1374.4 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa.
The -S code adds a piston magnet for AirTAC reed or electronic switches via body grooves. The -B code specifies a male M18x1.5 thread on the 20 mm rod for direct load coupling.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.