verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACQ Series · JIS Compact Cylinder

Airtac ACQ Ultra Thin Air Cylinder ACQ50X5ST

The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X5ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 5mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.

  • BoreØ50 mm
  • Stroke5 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM10×1.5 (F) / M18×1.5 (B)
  • ConfigurationStandard compact
$53.78 $61.28Save 12% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACQ50 stroke, mounting and version on one page All ACQ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACQ Ultra Thin Air Cylinder ACQ50X5ST

The AirTAC ACQ50X5ST is a double-acting JIS compact cylinder engineered to deliver substantial force within a minimal axial footprint. Its short C-clip and riveted body construction drastically reduces overall length compared to round-body alternatives, saving valuable machine mounting depth. At 50 mm bore, it provides 981.8 N of push force and 824.6 N of pull force at 0.5 MPa.

This specific configuration includes a built-in piston magnet (the -S option) designed to interface seamlessly with AirTAC magnetic reed or electronic solid-state switches via the sensor grooves around the body. The unit features a 20 mm piston rod, a NPT1/4 port, and a default female M10x1.5 rod-end thread. End-of-stroke deceleration is handled by fixed NBR elastomer bumpers rather than adjustable air cushions. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac ACQ Ultra Thin Air Cylinder ACQ50X5ST Technical Specifications

ModelAirtac ACQ Ultra Thin Air Cylinder ACQ50X5ST
SeriesACQ JIS compact (thin) cylinder
Bore sizeØ50 mm
Stroke5 mm
Acting typeDouble acting
Port sizePT1/4
Rod end threadM10×1.5 female / M18×1.5 male (B)
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionBumper (both ends)
Max standard strokeUp to 100 mm

Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac ACQ Ultra Thin Air Cylinder ACQ50X5ST

ACQJIS compact (thin) double-acting cylinder series.
50Bore size in mm.
×5Stroke length in mm.
SBuilt-in magnet for magnetic-switch position sensing (omit = no magnet).
BMale-thread piston rod (omit = female-thread rod).

Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).

Where the Airtac ACQ Ultra Thin Air Cylinder ACQ50X5ST Is Used

precision_manufacturing

Injection Mold Ejection

Provides 981.8 N of push force at 0.5 MPa to eject small plastic parts from injection molds, utilizing the 5 mm stroke for rapid, short-throw ejection cycles.

conveyor_belt

Pallet Stopper Gate

Acts as a compact stopper mechanism on a packaging conveyor, extending its 20 mm rod to halt incoming pallets before they enter the wrapping station.

build

Press-Fit Pin Insertion

Drives small alignment pins into sheet metal assemblies on an automotive sub-assembly line, where the short 5 mm stroke ensures precise, repeatable insertion without excess travel.

Is the Airtac ACQ Ultra Thin Air Cylinder ACQ50X5ST the Right Cylinder?

When sizing this 50 mm bore model, stepping down to the Ø40 bore yields 628.3 N of push at 0.5 MPa, while stepping up to the Ø63 bore provides 1558.6 N. The 5 mm stroke offers extremely short travel for high-cycle clamping or pressing. Remember that a plain ACQ cylinder does not inherently hold a load if air pressure is lost or the valve is centered; the rod will drift, and the fixed NBR bumper only decelerates the piston near stroke end. For fail-safe position holding, an external rod lock or pilot-operated check valve is required.

To order this exact unit, confirm the 50 mm bore, 5 mm stroke, NPT1/4 port, female M10x1.5 rod thread, and the -S magnet option for sensor compatibility.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short-body depth vs. a round-body cylinder
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (S) for sensors?
  • ✓ Female (blank) or male (B) rod thread
  • ✓ Side load — avoid on a compact rod
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the short piston rod.
  • check Very long strokes are unsuitable for the compact body.
  • check Handle the C-clip carefully; seat it fully in its groove.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACQ Ultra Thin Air Cylinder ACQ50X5ST FAQ

The ACQ50X5ST generates 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 1374.4 N. The maximum push force is 200 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.

No, the ACQ50X5ST uses fixed NBR elastomer bumpers at each end to absorb end-stop impact. It is not a field-adjustable air cushion. For high-speed or high-energy loads, you should add an external shock absorber or slow the approach speed.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC ACQ Compact Cylinders

Request a Quote for Airtac ACQ Ultra Thin Air Cylinder ACQ50X5ST

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACQ50X5ST and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.