
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X5T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 5mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X5T is a double-acting JIS compact cylinder engineered for minimal axial footprint, utilizing a C-clip and riveted piston-to-rod assembly to shorten the overall body length. Delivering 981.8 N of push force at 0.5 MPa, it is built around a 50 mm bore and a precise 5 mm stroke.
This model features a 20 mm piston rod with a female M10x1.5 thread and a NPT1/4 port. End-of-travel deceleration relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, and the body includes standard magnetic-switch grooves, though this specific unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X5T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives a short 5 mm stroke to seat dowel pins in machined aluminum housings without overstressing the surrounding material.
Executes rapid, compact tucking motions on packaging lines where the 981.8 N extend force easily folds heavy corrugated cardboard.
Secures electronic panels within a tight machine frame, leveraging the short C-clip body depth to minimize axial mounting space.
When sizing this actuator, stepping down to a 40 mm bore yields 628.3 N of push at 0.5 MPa, while stepping up to a 63 mm bore provides 1558.6 N, allowing you to match the exact energy requirement of your 5 mm movement. Note that a plain double-acting cylinder drifts if air pressure is lost or the valve is centered; the fixed bumper only decelerates the piston near the stroke end and will not hold a load, so an external rod lock or pilot-operated check valve is required for fail-safe positioning.
To order, confirm the 50 mm bore, 5 mm stroke, NPT1/4 port, female M10x1.5 rod thread, and the absence of the sensor magnet (S option) for your assembly.
Quick checklist
The 50 mm bore generates a push force of 981.8 N and a pull force of 824.6 N at 0.5 MPa. At 0.7 MPa, the push force is 1374.4 N, with a maximum push capacity of 200 kgf at 1.0 MPa. Operating pressure spans 0.15-1.0 MPa, and the speed range is 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end to absorb impact, which is not a field-adjustable air cushion. For high kinetic energy, you should slow the approach or add an external shock absorber. It does not hold its load on air loss; the piston drifts, requiring an external rod lock for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.