
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X60BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 60mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X60BT is a double-acting, single-rod JIS compact cylinder engineered for space-constrained machinery. A short C-clip and riveted piston-to-rod assembly minimizes axial footprint compared to traditional round-body units. Operating at 0.5 MPa, it generates 981.8 N of push force and 824.6 N of pull force, peaking at a 200 kgf maximum push at 1.0 MPa.
This specific configuration includes a male-thread M18x1.5 piston rod end for direct load coupling, alongside a 20 mm rod diameter and NPT1/4 port. End-of-stroke deceleration relies on fixed NBR elastomer bumpers rather than adjustable air cushions, so high-energy cycles may need external shock absorbers. The body features magnetic-switch grooves, though this SKU ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X60BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 981.8 N of extension force at 0.5 MPa to securely clamp aluminum engine blocks during CNC machining operations.
Drives a 60 mm stroke sealing head on automated packaging lines, using the male M18x1.5 rod to mount the sealing jaw directly.
Actuates a routing gate on a conveyor system, relying on the short compact body to fit within tight 50 mm frame depths.
When sizing this 50 mm bore actuator, evaluate your force margins: the smaller 40 mm bore yields 628.3 N push, whereas the larger 63 mm bore provides 1558.6 N push at 0.5 MPa. This ACQ50X60BT bridges that gap perfectly for medium-duty tasks. To finalize your order, confirm the 50 mm bore, 60 mm stroke, NPT1/4 port, male M18x1.5 rod thread, and no magnet. Note that a standard compact cylinder drifts when air pressure is lost or the valve centers; the fixed bumper decelerates the end stop but does not lock the load. For fail-safe holding, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
This 50 mm bore cylinder provides 981.8 N push and 824.6 N pull at 0.5 MPa, 1374.4 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It uses a NPT1/4 port, a 20 mm rod, and operates at speeds of 30-500 mm/s.
No. It uses fixed NBR elastomer bumpers at each end to absorb end-stop impact, which are not field-adjustable. Additionally, while the body has sensor grooves, this specific model lacks the internal magnet, so it cannot trigger magnetic switches without modification.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.