
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X60SBCBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 60mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X60SBCBT is a double-acting JIS compact cylinder engineered for space-constrained pneumatics. It delivers a robust 981.8 N push and 824.6 N pull force at 0.5 MPa. The short C-clip and riveted body design significantly reduces axial mounting depth compared to standard round-body units, making it ideal for tight machine footprints.
This specific configuration includes a built-in piston magnet (-S) for position sensing, a male M18x1.5 threaded rod end (-B) for direct load coupling, and a CB mounting bracket. End-of-stroke energy is managed by fixed NBR elastomer bumpers rather than adjustable cushions, meaning external shock absorbers should be added for high-speed operations. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X60SBCBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives diverter arms on logistics conveyor lines, utilizing the 981.8 N extend force to push heavy cartons onto adjacent sorting lanes.
Actuates secondary clamping jaws inside CNC machining centers where the 60 mm stroke and compact body length minimize Z-axis interference.
Controls pneumatic stop gates in end-of-line palletizing cells, handling payloads reliably with its 200 kgf maximum push capacity.
When sizing this 50 mm bore model, consider stepping down to the 40 mm bore (628.3 N push @0.5 MPa) for lighter loads, or up to the 63 mm bore (1558.6 N push @0.5 MPa) if greater thrust is required. Keep in mind that a standard ACQ body does not hold its position if air pressure drops; the rod will drift, so an external rod lock or pilot-operated check valve is necessary for fail-safe load holding.
To order, confirm your operating parameters match the 0.15-1.0 MPa pressure range and verify the essentials: 50 mm bore, 60 mm stroke, NPT1/4 port, S magnet for reed or electronic switches, B male rod thread, and CB bracket interface.
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 981.8 N push and 824.6 N pull. At 0.7 MPa, push increases to 1374.4 N. The maximum push force is 200 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and uses a NPT1/4 port.
It relies on fixed NBR elastomer bumpers at both ends to absorb shocks, which are not field-adjustable; high-speed applications may need external shock absorbers. The built-in -S magnet works with AirTAC reed or electronic switches fitted into the body grooves for precise position detection.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.