
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X60SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 60mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X60SBT is a double-acting JIS compact cylinder engineered to deliver 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. Its short C-clip and riveted piston-to-rod assembly drastically reduce overall axial length compared to traditional round-body units, saving valuable mounting depth within tight machine envelopes.
This specific configuration includes a built-in piston magnet (-S) for position sensing and a male-thread rod end (-B) sized at M18x1.5 for direct mechanical coupling. Deceleration at the stroke ends relies on fixed NBR elastomer bumpers rather than adjustable pneumatic cushions, meaning operators should externally slow high-speed approaches or mount external shock absorbers for heavy kinetic loads. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X60SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the folding mechanism on continuous-motion packaging lines, utilizing the 60 mm stroke and male rod thread to push corrugated flaps into the sealing jaws with reliable 981.8 N force.
Actuates a routing flap on a parcel sorting conveyor, where the compact body depth allows tight installation between adjacent belt sections and the NBR bumper absorbs the diverting impact.
Provides secondary push-off to eject finished turned parts from a CNC lathe spindle, using the magnetic piston to trigger a reed or solid-state switch for a confirmed ejection signal.
When sizing this 50 mm bore actuator, consider stepping down to the 40 mm bore for lighter duties (providing 628.3 N push at 0.5 MPa) or moving up to the 63 mm bore for heavier demands (providing 1558.6 N push at 0.5 MPa). To finalize your build, confirm the 50 mm bore, 60 mm stroke, NPT1/4 port thread, the integrated magnet for reed or electronic switches, and the male M18x1.5 rod threading.
Remember that a standard ACQ body does not inherently secure a load if compressed air is lost or the directional valve is centered. The piston will drift, and the fixed bumper only decelerates motion near the end caps. If your application demands fail-safe position holding, incorporate an external rod lock or a pilot-operated check valve into the pneumatic circuit.
Quick checklist
This 50 mm bore double-acting cylinder provides 981.8 N push and 824.6 N pull at 0.5 MPa, 1374.4 N push at 0.7 MPa, and a maximum push force of 200 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa pressure, handles speeds of 30-500 mm/s, and functions in -20 to +70 C temperatures.
It uses fixed NBR elastomer bumpers at both ends to absorb end-stop energy, which are not field-adjustable, so high-speed applications may need external shock absorbers. The -S option includes a piston magnet that works with AirTAC reed or electronic switches mounted in the body grooves for position detection.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.