
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X60ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 60mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X60ST is a double-acting, single-rod JIS compact cylinder engineered to deliver 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body design drastically reduces axial mounting depth compared to conventional round-body units, freeing up critical machine footprint space.
This 50 mm bore unit features a built-in piston magnet (-S) compatible with AirTAC reed or electronic switches, fitting into the sensor grooves around the barrel. End-of-travel deceleration relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-speed applications should incorporate external shock absorbers to manage impact energy. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X60ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Delivers 981.8 N of extend force at 0.5 MPa to securely clamp heavy cast iron engine blocks onto machining centers.
Uses the 60 mm stroke to fold and square heavy corrugated cardboard flaps at cycle rates up to 500 mm/s.
Actuates a routing flap to push 20 kg product cartons off a main conveyor line into a packing spur.
Generating 981.8 N of push at 0.5 MPa, this 50 mm bore cylinder sits perfectly between the 40 mm bore (628.3 N push) for lighter duties and the 63 mm bore (1558.6 N push) for heavier loads. To specify correctly, confirm your required 60 mm stroke, the NPT1/4 port size, the M10x1.5 female rod thread, and the -S magnet option. Because a standard ACQ body lacks a physical lock, the rod will drift if air pressure drops or the valve is centered; applications requiring fail-safe position holding must integrate an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.5 MPa, the push force is 981.8 N and the pull force is 824.6 N. At 0.7 MPa, the push force is 1374.4 N. The maximum allowable push force is 200 kgf at 1.0 MPa.
No, it uses a fixed NBR elastomer bumper at each end to absorb the end stop. It is not field-adjustable, so for high kinetic energy loads you should add an external shock absorber or slow the approach speed.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.