
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X70BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 70mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X70BT is a double-acting JIS compact cylinder engineered to deliver 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body design significantly reduces axial mounting depth compared to standard round-body units, saving valuable machine footprint. This 50mm bore model includes a 70mm stroke and a NPT1/4 port.
Equipped with a male-thread piston rod end (M18x1.5), it couples directly to tooling while the 20mm rod diameter handles lateral stress. Instead of an adjustable air cushion, the cylinder relies on a fixed NBR elastomer bumper at each end to decelerate the piston. The body features integrated magnetic-switch grooves, though this specific configuration ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X70BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates routing gates on high-speed beverage conveyors, utilizing the 981.8 N push force to swiftly redirect heavy glass bottle traffic into labeling stations.
Drives the mechanical arms that fold major corrugated box flaps, where the 70mm stroke and male M18x1.5 rod end secure directly to the folding bracket.
Pushes stripper plates to eject plastic components from injection molds, fitting neatly into tight mold cavities due to the space-saving compact C-clip body.
This 50mm bore provides 981.8 N of push at 0.5 MPa. If your application requires less force, step down to the 40mm bore offering 628.3 N, or move up to the 63mm bore providing 1558.6 N for heavier loads. Ensure you specify the 50mm bore, 70mm stroke, NPT1/4 port, male M18x1.5 rod thread, and no magnet when ordering.
Because a plain ACQ body does not hold its position if air pressure drops or the valve is centred, the rod will drift. The fixed NBR bumper only softens the impact near stroke end and acts as no lock. For fail-safe load holding, integrate an external rod lock or a pilot-operated check valve into your pneumatic setup.
Quick checklist
This 50mm bore double-acting cylinder generates 981.8 N of push force and 824.6 N of pull force at 0.5 MPa, and 1374.4 N of push at 0.7 MPa. The maximum push force is 200 kgf at 1.0 MPa. The maximum standard stroke available for this bore is 100 mm.
It uses a fixed NBR elastomer bumper at each end to absorb end-stop energy, which is not an adjustable air cushion. For high-speed applications, you should slow the approach or add an external shock absorber. Additionally, it does not hold its load if air is lost; the piston drifts, so an external rod lock is required for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.