
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X70SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 70mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X70SBT is a double-acting JIS compact cylinder engineered to deliver 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body architecture drastically reduces axial mounting depth compared to conventional round-body units, making it highly effective for machines where space is restricted.
This specific configuration includes a built-in piston magnet (-S) for use with AirTAC reed or electronic switches, and a male-thread piston rod end (-B, M18x1.5) that couples directly to your mechanism. The 50 mm bore uses a NPT1/4 port, and end-of-stroke energy is managed by a fixed NBR elastomer bumper rather than an adjustable cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X70SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 981.8 N push force required to fold and seal heavy cardboard flaps on continuous motion packaging lines.
Drives a lateral pusher to sort heavy pallets at transfer stations using its 70 mm stroke and male M18x1.5 rod connection.
Ejects dense plastic parts from injection molding tools where the compact 50 mm body saves valuable Z-axis clearance.
When sizing this 50 mm bore unit, consider stepping down to the 40 mm bore (628.3 N push @0.5 MPa) for lighter duties, or up to the 63 mm bore (1558.6 N push @0.5 MPa) if you need greater thrust. Keep in mind that a standard ACQ body does not hold its position if air pressure drops or the valve is centred; the rod will drift, and the fixed NBR bumper only decelerates the piston near stroke end. For a fail-safe hold, an external rod lock or pilot-operated check valve is required.
To order this exact unit, confirm the 50 mm bore, 70 mm stroke, NPT1/4 port, the -S magnet for sensors, and the -B male M18x1.5 rod thread. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
Quick checklist
This 50 mm bore double-acting cylinder generates 981.8 N push and 824.6 N pull at 0.5 MPa, 1374.4 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. The standard stroke limit for this bore is 100 mm.
No, it uses a fixed NBR elastomer bumper at each end to absorb end-stop impact. It is not field-adjustable, so for high-speed or high-energy cycles, you should slow the approach or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.