
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X70T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 70mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X70T is a double-acting JIS compact cylinder engineered to deliver a robust 981.8 N push force at 0.5 MPa alongside an 824.6 N pull force. Its integrated C-clip and riveted piston-to-rod design drastically reduce the overall axial footprint, making it highly effective for machinery where a traditional round-body unit would simply be too long.
This 50 mm bore variant features a 20 mm piston rod and a NPT1/4 port. It relies on a fixed NBR elastomer bumper at each end to absorb end-stop energy rather than an adjustable air cushion. The body includes standard magnetic-switch grooves, though this specific SKU ships without the internal magnet, and the female M10x1.5 rod-end thread ensures straightforward load coupling. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X70T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates routing gates on high-speed logistics conveyors, utilizing the 981.8 N extend force to reliably pivot heavy cardboard cartons onto secondary sorting lanes.
Deploys mechanical stops inside automated palletizing cells to secure incoming goods, taking advantage of the 70 mm stroke within a tight axial machine envelope.
Drives secondary ejector arms for plastic parts, where the fixed NBR bumper effectively softens the mechanical impact during the 30-500 mm/s operational speed range.
When sizing this model, consider stepping down to the 40 mm bore if your application only requires 628.3 N of push force at 0.5 MPa, or moving up to the 63 mm bore for a substantial 1558.6 N if heavier loads are anticipated. Keep in mind that a standard ACQ body does not hold its position if air pressure drops or the valve is centered; the piston will drift, so an external rod lock or pilot-operated check valve is necessary for fail-safe load holding.
To finalize your order, verify the 50 mm bore, 70 mm stroke, NPT1/4 port, and the default female M10x1.5 rod thread. If your design requires position sensing, you must specify the -S option to include the internal magnet for AirTAC reed or electronic switches.
Quick checklist
This 50 mm bore cylinder provides 981.8 N push and 824.6 N pull at 0.5 MPa, 1374.4 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It operates within a 0.15-1.0 MPa pressure range at speeds of 30-500 mm/s.
No, the ACQ50X70T uses a fixed NBR elastomer bumper at each end to absorb end-stop shock, not a field-adjustable air cushion. For high-energy or high-speed cycles, you should slow the approach speed or install an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.