
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X75BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 75mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X75BT is a double-acting JIS compact cylinder engineered to deliver 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body design significantly reduces overall axial length compared to standard round-body alternatives, saving valuable mounting depth within tight machine frames.
This specific configuration features a 20 mm piston rod with a male M18x1.5 thread end for direct load coupling. Deceleration is handled by a fixed NBR elastomer bumper at each end of the stroke rather than an adjustable cushion, and the body includes integrated sensor grooves, though this particular unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X75BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the folding mechanism on continuous-motion carton erectors, utilizing the 75 mm stroke and 981.8 N push force to cleanly square and seal corrugated packaging flaps.
Actuates heavy-duty routing gates on roller conveyors, where the compact body depth fits within tight transfer zone frames and the male M18x1.5 thread secures the diverter arm.
Opens and closes the sliding safety cab door on CNC turning centers, benefiting from the short 75 mm stroke and fixed NBR bumper to absorb the end-of-travel stop without rebound.
When sizing your pneumatic system, note that stepping down to a 40 mm bore yields 628.3 N of push at 0.5 MPa, while stepping up to a 63 mm bore provides 1558.6 N. The 50 mm bore offers a robust 1374.4 N at 0.7 MPa with a maximum push capacity of 200 kgf at 1.0 MPa. Keep in mind that a plain ACQ body does not hold its position if air pressure is lost or the valve is centered; the piston will drift and the fixed bumper only decelerates it near the stroke end. For a fail-safe hold, an external rod lock or pilot-operated check valve is required. To order this variant correctly, confirm the 50 mm bore, 75 mm stroke, NPT1/4 port, male M18x1.5 rod thread, and no magnet.
Quick checklist
At 0.5 MPa, the push force is 981.8 N and the pull force is 824.6 N. At 0.7 MPa, the push force is 1374.4 N. The maximum push force is 200 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa, handles a proof pressure of 1.5 MPa, and runs at speeds between 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end to absorb the end stop; it is not an adjustable air cushion. For high-energy cycles, you should slow the approach or add an external shock absorber. Additionally, it does not hold its load if air is lost—the piston drifts, so an external rod lock is needed for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.