
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X75SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 75mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X75SBT is a double-acting JIS compact cylinder engineered for space-constrained machinery, utilizing a riveted C-clip body design to drastically reduce axial footprint compared to round-body alternatives. Generating 981.8 N of push force and 824.6 N of pull force at 0.5 MPa, this 50 mm bore unit is built for substantial actuation tasks within a tight envelope.
This specific configuration includes an integrated piston magnet (-S) for position sensing and a male M18x1.5 threaded rod end (-B) for direct load coupling. End-of-travel deceleration is handled by fixed NBR elastomer bumpers rather than adjustable air cushions, and the hard-anodized aluminum bore operates at speeds from 30-500 mm/s. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X75SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates heavy-duty redirect gates on packaging conveyors, utilizing the 981.8 N extend force to push loaded pallets onto secondary spur lines.
Drives mechanical arms to fold large corrugated carton flaps prior to case sealing, where the 75 mm stroke and male M18x1.5 rod mount directly to the folding bracket.
Serves as a compact secondary ejector on injection molding machines, saving axial depth while providing reliable 824.6 N retraction force to pull stripper plates.
Selecting the ACQ50X75SBT provides 981.8 N push at 0.5 MPa; if you need less force, the adjacent 40 mm bore yields 628.3 N, while stepping up to the 63 mm bore provides 1558.6 N. Keep in mind this cylinder relies on live air pressure to function—if a valve centers or supply drops, the rod will drift, as the fixed NBR bumper only decelerates the stroke end rather than locking the load, requiring an external pilot-operated check valve for fail-safe holding. Ensure your build specifies the 50 mm bore, 75 mm stroke, NPT1/4 port, male M18x1.5 rod thread, and the required magnetic switches.
Quick checklist
This 50 mm bore cylinder delivers a push force of 981.8 N and a pull force of 824.6 N at 0.5 MPa. At 0.7 MPa, the push force is 1374.4 N, with a maximum push capacity of 200 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and has a maximum standard stroke limit of 100 mm.
The ACQ50X75SBT uses fixed NBR elastomer bumpers at both ends to absorb end stops; it is not an adjustable air cushion, so external shock absorbers are recommended for high-energy cycles. The -B option specifies a male M18x1.5 threaded piston rod end for direct load attachment, and the -S option provides a magnet compatible with AirTAC reed or electronic switches.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.