verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC ACQ Series · JIS Compact Cylinder

Airtac ACQ Ultra Thin Air Cylinder ACQ50X75T

The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X75T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 75mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.

  • BoreØ50 mm
  • Stroke75 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM10×1.5 (F) / M18×1.5 (B)
  • ConfigurationStandard compact
$68.03 $75.53Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACQ50 stroke, mounting and version on one page All ACQ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACQ Ultra Thin Air Cylinder ACQ50X75T

The AirTAC ACQ50X75T is a double-acting JIS compact cylinder engineered with a short C-clip and riveted piston-to-rod body, significantly reducing axial mounting depth compared to conventional round-body units. Delivering a robust 981.8 N push force at 0.5 MPa, it utilizes a 20 mm piston rod and a NPT1/4 port for efficient pneumatic flow.

This 50 mm bore model relies on fixed NBR elastomer bumpers at both stroke ends to absorb end-stop impact rather than an adjustable air cushion. The body features integrated magnetic-switch grooves, though this specific configuration ships without the internal magnet, operating seamlessly within a 30-500 mm/s speed range across a 75 mm stroke. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac ACQ Ultra Thin Air Cylinder ACQ50X75T Technical Specifications

ModelAirtac ACQ Ultra Thin Air Cylinder ACQ50X75T
SeriesACQ JIS compact (thin) cylinder
Bore sizeØ50 mm
Stroke75 mm
Acting typeDouble acting
Port sizePT1/4
Rod end threadM10×1.5 female / M18×1.5 male (B)
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionBumper (both ends)
Max standard strokeUp to 100 mm

Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac ACQ Ultra Thin Air Cylinder ACQ50X75T

ACQJIS compact (thin) double-acting cylinder series.
50Bore size in mm.
×75Stroke length in mm.
SBuilt-in magnet for magnetic-switch position sensing (omit = no magnet).
BMale-thread piston rod (omit = female-thread rod).

Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).

Where the Airtac ACQ Ultra Thin Air Cylinder ACQ50X75T Is Used

conveyor_belt

Packaging Line Diverter

Actuates sorting gates on high-speed packaging conveyors, utilizing the 981.8 N push force to reliably redirect heavy cartons without excessive axial footprint.

precision_manufacturing

CNC Fixture Clamping

Secures heavy cast iron blocks during CNC machining operations, where the 824.6 N pull force and fixed NBR bumper handle rapid clamping cycles safely.

build

Injection Mold Ejection

Drives ejection plates in plastic injection molding machines, benefiting from the 75 mm stroke and compact C-clip body to save valuable machine bay depth.

Is the Airtac ACQ Ultra Thin Air Cylinder ACQ50X75T the Right Cylinder?

When sizing your pneumatic setup, step down to the 40 mm bore for 628.3 N push at 0.5 MPa, or step up to the 63 mm bore for 1558.6 N push at 0.5 MPa. The ACQ50X75T provides a balanced 981.8 N extension force, making it ideal for medium-duty tasks. To finalize your order, confirm the 50 mm bore, 75 mm stroke, NPT1/4 port, female M10x1.5 rod thread, and the absence of a sensor magnet.

Keep in mind that a standard ACQ body does not maintain its position or hold a load if air pressure drops or the control valve is centered. The piston will drift, and the fixed NBR bumper only decelerates the motion near the stroke end. For fail-safe load holding, you must integrate an external rod lock or a pilot-operated check valve into your circuit.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short-body depth vs. a round-body cylinder
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (S) for sensors?
  • ✓ Female (blank) or male (B) rod thread
  • ✓ Side load — avoid on a compact rod
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the short piston rod.
  • check Very long strokes are unsuitable for the compact body.
  • check Handle the C-clip carefully; seat it fully in its groove.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACQ Ultra Thin Air Cylinder ACQ50X75T FAQ

This 50 mm bore double-acting cylinder provides 981.8 N push and 824.6 N pull at 0.5 MPa, increasing to 1374.4 N push at 0.7 MPa, with a maximum push capacity of 200 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa and runs at speeds of 30-500 mm/s.

This model uses fixed NBR elastomer bumpers at each end, not an adjustable air cushion, so for high-energy cycles you should slow the approach or add an external shock absorber. While the body has sensor grooves, this specific unit ships without a magnet; you would need the -S option to use reed or electronic switches.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC ACQ Compact Cylinders

Request a Quote for Airtac ACQ Ultra Thin Air Cylinder ACQ50X75T

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACQ50X75T and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.