
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X80BLBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 80mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X80BLBT is a double-acting JIS compact cylinder engineered for tight axial spaces. Its short C-clip and riveted body architecture significantly reduces overall depth compared to standard round-body units, yielding a 981.8 N push force at 0.5 MPa across an 80 mm stroke.
This specific configuration features a male-thread M18x1.5 piston rod end for direct load coupling, alongside an LB mounting bracket interface. The bore uses a fixed NBR elastomer bumper at each end to absorb end-stop impact, and the body includes sensor grooves, though this unit ships without a magnetic piston. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X80BLBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the folding mechanism on continuous-motion packaging lines, utilizing the 80 mm stroke and 981.8 N push to snap corrugated blanks into square forms securely.
Actuates routing gates on heavy-duty roller conveyors, where the male M18x1.5 rod end threads directly into the diverter linkage to redirect filled pallets.
Mounts via the LB bracket on molding machinery to power secondary ejector plates, relying on the short body profile to fit within tight mold base cavities.
When sizing this 50 mm bore actuator, compare its 981.8 N push at 0.5 MPa against the adjacent bores: the 40 mm delivers 628.3 N, while the 63 mm provides 1558.6 N. To finalize your ACQ50X80BLBT order, verify the 80 mm stroke, NPT1/4 port, LB bracket, and the male M18x1.5 rod thread.
Note that a plain compact cylinder will drift if air pressure drops or the valve centers. The fixed NBR bumper only decelerates the piston near the stroke ends rather than locking it, so integrate an external rod lock or pilot-operated check valve if your application demands fail-safe position holding.
Quick checklist
This 50 mm bore double-acting cylinder provides 981.8 N push and 824.6 N pull at 0.5 MPa, 1374.4 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. The air supply connects via a NPT1/4 threaded port.
No. The ACQ50X80BLBT uses fixed NBR elastomer bumpers at the stroke ends, not an adjustable air cushion. It also does not lock the load pneumatically; if air is lost, the rod drifts. You must add an external shock absorber for high-energy stops or a pilot-operated check valve for position holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.