
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X80SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 80mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X80SBT is a double-acting JIS compact cylinder engineered to deliver 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body design drastically reduces axial mounting depth compared to round-body alternatives, freeing up valuable machine footprint. The unit features a 20 mm piston rod and a NPT1/4 port.
This specific configuration includes a male M18x1.5 threaded rod end for direct load coupling, alongside a built-in piston magnet (-S) for position sensing. Instead of an adjustable air cushion, it relies on fixed NBR elastomer bumpers at both ends to absorb end-stop impact. Operators should pair the magnet with AirTAC reed or electronic switches for precise stroke detection. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X80SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the folding mechanism on continuous-motion packaging lines, utilizing the 981.8 N push force to snap heavy cardboard carton flaps into position securely.
Uses the male M18x1.5 rod thread to rigidly attach a stripper arm, pulling finished plastic parts from an injection molding cavity with 824.6 N of retract force.
Actuates a routing gate on a conveyor system to redirect heavy wooden pallets, relying on the compact profile to fit within tight transfer station clearances.
When sizing this 50 mm bore model, consider stepping down to the 40 mm bore if your application requires less force (628.3 N push at 0.5 MPa), or moving up to the 63 mm bore for heavier loads (1558.6 N push at 0.5 MPa). The 80 mm stroke sits well within the 100 mm standard limit for this bore, though longer travels up to 300 mm are available in the long-stroke range.
Remember that a plain ACQ cylinder does not hold its position if air pressure drops or the valve is centered; the rod will drift, and the fixed NBR bumper only decelerates it near the stroke end. For fail-safe load holding, an external rod lock or pilot-operated check valve is required. To order, confirm the 50 mm bore, 80 mm stroke, NPT1/4 port, male M18x1.5 rod thread, and the integrated magnet.
Quick checklist
This 50 mm bore double-acting cylinder provides a push force of 981.8 N and a pull force of 824.6 N at 0.5 MPa. At 0.7 MPa, the push force reaches 1374.4 N, with a maximum push capacity of 200 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa, a temperature range of -20 to +70 C, and a speed range of 30-500 mm/s.
It uses fixed NBR elastomer bumpers at both ends to absorb end-stop impact; this is not an adjustable air cushion, so for high energy cycles you should add an external shock absorber. The integrated piston magnet works with AirTAC reed or electronic switches mounted in the body grooves for non-contact position detection.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.