
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X80ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 80mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X80ST is a double-acting JIS compact cylinder engineered for minimal axial footprint. Its short C-clip and riveted body design saves mounting depth where a traditional round-body unit cannot fit. Delivering 981.8 N of push force at 0.5 MPa, it provides robust performance within a tight 50 mm bore package.
This model includes a built-in piston magnet (-S) for position sensing via AirTAC reed or electronic switches seated in the body grooves. Deceleration is handled by a fixed NBR elastomer bumper at each end stop. Since this bumper is not an adjustable air cushion, high-energy cycles may require slowing the approach or adding an external shock absorber. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X80ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Gates and diverts heavy PET bottle streams on a high-speed filling conveyor using its 981.8 N thrust.
Actuates a power chuck opening mechanism on a CNC lathe, fitting neatly into the tight machine footprint.
Folds heavy corrugated cardboard flaps on a case erector where the fixed NBR bumper absorbs the end impact.
This 50 mm bore yields 981.8 N push and 824.6 N pull at 0.5 MPa. If you need slightly less force, the 40 mm bore provides 628.3 N push; stepping up to the 63 mm bore gives 1558.6 N push. To confirm your ordering essentials: specify the 50 mm bore, 80 mm stroke, NPT1/4 port, female M10x1.5 rod thread, and the required magnetic switch.
Keep in mind that a plain ACQ body does not hold its position if air pressure drops or the valve is centred—the rod will drift. For a fail-safe load hold, an external rod lock or pilot-operated check valve is required.
Quick checklist
At 0.5 MPa, the push force is 981.8 N and the pull force is 824.6 N. At 0.7 MPa, the push force is 1374.4 N. The maximum push force is 200 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa.
No. The ACQ50X80ST uses a fixed NBR elastomer bumper at each end, not an adjustable air cushion. Additionally, it does not hold a load if air is lost; the rod drifts. For fail-safe holding, an external rod lock or pilot-operated check valve is required.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.