
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X80T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 80mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X80T is a double-acting, single-rod JIS compact cylinder engineered for space-constrained machinery. By utilizing a C-clip and riveted piston-to-rod joint, the overall axial length is drastically reduced compared to conventional round-body units. At 50 mm bore and 80 mm stroke, it generates 981.8 N of push force and 824.6 N of pull force at 0.5 MPa, utilizing a 20 mm rod with an M10x1.5 female thread end.
This specific model relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable air cushion, meaning high-energy cycles may require slowing the approach or adding external shock absorbers. The body features integrated magnetic-switch grooves for position sensing, though this particular unit ships without the internal magnet. Air flows through a NPT1/4 port, and operators must note that the fixed bumper only decelerates the piston near stroke end; it will not hold a load if air pressure is lost. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X80T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the folding mechanism on continuous-motion packaging lines, utilizing the 981.8 N push force to cleanly tuck heavy corrugated flaps before sealing.
Actuates a routing diverter on a 50 mm stroke transfer conveyor, where the compact C-clip body minimizes frame intrusion and the fixed NBR bumper handles the repetitive end-stop impact.
Opens and closes a sliding machine tool safety door, taking advantage of the 20 mm rod diameter and female M10x1.5 thread to securely couple the load without excessive side play.
When sizing this 50 mm bore, stepping down to a 40 mm bore yields 628.3 N of push force at 0.5 MPa, while stepping up to a 63 mm bore provides 1558.6 N. The ACQ50X80T provides a balanced 981.8 N at 0.5 MPa, making it ideal for medium-duty tasks. If your application requires fail-safe load holding during air loss or valve centering, you must supplement this cylinder with an external rod lock or a pilot-operated check valve, as the piston will drift without live pressure.
To order, confirm the 50 mm bore, 80 mm stroke, NPT1/4 port, and the default female M10x1.5 rod thread. This unit lacks the -S magnet option; if you need to trigger reed or electronic switches, specify the S suffix. The standard stroke limit for this bore is 100 mm, with long-stroke variants available up to 300 mm.
Quick checklist
The ACQ50X80T provides 981.8 N push and 824.6 N pull at 0.5 MPa, and 1374.4 N push at 0.7 MPa. The maximum push force is 200 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, with a proof pressure of 1.5 MPa, and a speed range of 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to absorb end-stop shock, which is not field-adjustable. It also does not function as a lock; the piston will drift if air pressure is lost or the valve is centered, requiring an external rod lock for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.