
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X90BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 90mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X90BT is a double-acting JIS compact cylinder engineered to deliver 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. Its C-clip and riveted piston-to-rod assembly drastically reduce the overall axial length, saving valuable mounting depth in tight machinery layouts compared to conventional round-body units.
This specific configuration includes a male-thread piston rod end (M18x1.5) for direct load coupling, a 20 mm rod diameter, and a NPT1/4 port. The hard-anodized aluminum bore relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable air cushion, so high-energy cycles may require an external shock absorber. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X90BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Pushes medium-weight cartons off a sorting line using 981.8 N of extend force, fitting neatly into the tight transfer gap.
Drives a sealing head down 90 mm to close flaps, utilizing the male M18x1.5 thread for a rigid tool mounting.
Ejects formed plastic parts from a press bed, taking advantage of the short C-clip body to minimize machine footprint.
Selecting this 50 mm bore offers 981.8 N push at 0.5 MPa. If you need slightly less force, the 40 mm bore provides 628.3 N; stepping up to the 63 mm bore yields 1558.6 N. This model ships without a sensor magnet, though the body retains switch grooves for adding AirTAC reed or electronic sensors later. Confirm your ordering essentials: 50 mm bore, 90 mm stroke, NPT1/4 port, male M18x1.5 rod thread, and no magnet.
Keep in mind that a standard double-acting cylinder like this will not hold a load if air pressure drops or the directional valve centers. The rod will drift, and the fixed NBR bumper only decelerates the piston near the stroke end without acting as a mechanical lock. For fail-safe vertical holding, an external rod lock or pilot-operated check valve is required.
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 981.8 N push and 824.6 N pull. At 0.7 MPa, the push force is 1374.4 N, with a maximum push capacity of 200 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, speed range is 30-500 mm/s, and the maximum standard stroke for this bore is 100 mm.
It uses a fixed NBR elastomer bumper at each end to absorb shock, which is not a field-adjustable air cushion. If your cycle speeds generate high kinetic energy, you should add an external shock absorber. Additionally, the cylinder does not hold position on air loss; the rod drifts, requiring an external rod lock for fail-safe load holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.