
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X90SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 90mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X90SBT is a double-acting JIS compact cylinder engineered to deliver 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body design significantly reduces axial mounting depth compared to round-body alternatives, making it highly effective for machines where space along the stroke axis is tight. The bore is hard-anodized for longevity, and the unit relies on fixed NBR elastomer bumpers at each end to absorb end-stop impact.
This specific configuration includes a built-in piston magnet (S) for position sensing and a male-thread piston rod end (B). The M18x1.5 male thread couples directly to your tooling, while the integrated magnet allows you to mount AirTAC reed or electronic switches directly into the body's peripheral sensor grooves. Note that the fixed bumpers are not adjustable air cushions, so high-speed applications may require external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X90SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives a 90 mm stroke pop-up gate arm on a logistics sorting line, utilizing the 981.8 N push force to reliably redirect heavy cardboard cartons at high throughput.
Employs the M18x1.5 male rod thread to attach a custom linkage, opening and closing a pneumatic bar feeder mechanism with 824.6 N of retract pull at 0.5 MPa.
Secures stretch film rolls in an automated palletizing cell, using the integrated magnet to trigger reed or solid-state switches for precise 90 mm end-of-stroke positioning.
When sizing this 50 mm bore model, compare its 981.8 N push at 0.5 MPa against the adjacent options. Stepping down to a 40 mm bore yields 628.3 N of push force, whereas stepping up to a 63 mm bore provides 1558.6 N. The 90 mm stroke sits well within the 100 mm maximum standard stroke for this bore family, keeping the envelope compact. To finalize your order, confirm the 50 mm bore, 90 mm stroke, NPT1/4 port, built-in magnet, and the M18x1.5 male rod end.
Keep in mind that a standard ACQ body does not hold its position if air pressure drops or the directional valve is centered. The piston will drift, and the NBR bumper only decelerates the load near the stroke limits. If your process requires fail-safe load holding, you must add an external rod lock or a pilot-operated check valve to the system.
Quick checklist
This 50 mm bore cylinder provides 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 1374.4 N. The maximum push force is 200 kgf at 1.0 MPa. The stroke is 90 mm, which falls within the 100 mm maximum standard stroke limit for this bore size.
No, the ACQ50X90SBT uses fixed NBR elastomer bumpers at the stroke ends rather than adjustable air cushions. While this decelerates the load, high-speed or high-energy cycles may require an external shock absorber or slowing the approach speed to prevent damage.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.