
The AirTAC Adjustable Compact Cylinder ACQJ50~63 ACQJ50X80-100B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø50mm bore and 80mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ50X80-100B is a double-acting JIS compact cylinder featuring a male-thread piston rod (M18x1.5) and an external extend stop. A threaded adjuster with a lock nut lets you set the extend end position directly on the equipment without swapping parts. With a full stroke of 80mm and a 100mm adjustment window, the usable extend range spans 0-80mm, while the retract stroke remains unaffected.
Output force stays identical to a standard ACQ of the same bore because the piston area is unchanged. The unit integrates fixed NBR elastomer bumpers for end-of-stroke deceleration and includes sensor grooves, though this specific SKU ships without a magnet.
| Model | Airtac Adjustable Compact Cylinder ACQJ50~63 ACQJ50X80-100B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Full stroke | 80 mm |
| Adjuster thread | M16×1.5 |
| Port size | PT1/4 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M10×1.5 (F) / M18×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×80 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping extension on a CNC fixture during prototype runs or material thickness changes without disassembling the tooling.
Adjust the extend length of a sorting gate on a packaging conveyor to accommodate different carton widths on the fly.
Vary the stroke end position on a light assembly press to test engagement depths or set crimp limits across multiple product variants.
If your process requires a fixed depth every cycle without manual tweaking, a standard ACQ50 cylinder is sufficient. When ordering, verify the 80mm full stroke, 100mm window, male M18x1.5 rod thread, PT1/4 port, and confirm that no internal magnet (-S) is needed for your switch setup.
AirtacDistr lists every ACQJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj50-adjustable-cylinder
Quick checklist
The usable extend range is 0-80mm (80mm full stroke minus the 100mm window).
An external M16x1.5 threaded stop with a lock nut limits how far the rod extends, shortening stroke length only. It does not alter piston area, so force is unchanged. The cylinder uses fixed elastomer bumpers for deceleration rather than adjustable air cushions. Note that it will not hold the load on air loss; use an external rod lock for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.