
The AirTAC B01-SDA Dedicated Cylinder B01-SDA63X60B is a genuine double-acting COMPACT (thin) air cylinder with a Ø63mm bore and 60mm stroke, PT1/4 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
The AirTAC B01-SDA63X60B is a double-acting single-rod compact cylinder delivering 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa. The B01- prefix designates this as an application-dedicated (customer-specified) variant of the standard SDA63X60B, meaning it is mechanically identical to the base model but grouped for specific customer builds. It features a 63 mm bore, a 60 mm stroke, and a male M18x1.5 threaded piston rod end for robust load coupling.
Its short riveted body significantly reduces axial mounting depth compared to round-body units, saving valuable machine footprint. The bore is hard-anodized and uses a two-way piston seal. End-stopping relies on a fixed NBR bumper rather than an adjustable air cushion, which decelerates the piston near stroke limits but is not a lock. Because this specific SKU lacks the -S option, it has no piston magnet and cannot support position sensing.
| Model | Airtac B01-SDA Dedicated Cylinder B01-SDA63X60B |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Drives ejection pins on a 150-ton injection molding press where the 1558.6 N extend force clears heavy plastic parts and the male M18x1.5 rod secures the ejector plate.
Pushes a raw steel blank into a progressive die fixture, utilizing the 60 mm stroke and compact riveted body to fit within tight press side-guarding.
When sizing this unit, stepping down to an SDA50 yields 981.7 N of push at 0.5 MPa, while stepping up to an SDA80 provides 2513.3 N. Ensure your ordering essentials match this configuration: 63 mm bore, 60 mm stroke, PT1/4 port, male M18x1.5 rod thread, and no sensor magnet. A plain compact cylinder drifts when air pressure is lost or the valve is centered, as the fixed bumper only decelerates near the stroke end and acts as neither a lock nor a brake; if your application must hold a load without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
This 63 mm bore cylinder generates 1558.6 N push and 1401.5 N pull at 0.5 MPa, increasing to 2182.1 N push and 1962.2 N pull at 0.7 MPa. The theoretical maximum push is 318 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, withstands 1.5 MPa proof pressure, runs at 30-500 mm/s, and functions in -20 to +70 C temperatures.
The B01- prefix marks this as an application-dedicated (customer-specified) variant of the SDA63X60B, meaning all physical specs, dimensions, and forces are identical to the base model. Regarding end-stop handling, it uses a fixed NBR bumper to decelerate the stroke end; it is not an adjustable air cushion. For high-speed or high-energy cycles, you should slow the approach or add an external shock absorber.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.