verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAU Series · Profile-Type Cylinder

Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X350

The AirTAC B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X350 is a genuine double-acting profile-type standard air cylinder with a Ø50mm bore and 350mm stroke, 1/4" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.

  • BoreØ50 mm
  • Stroke350 mm
  • Port size1/4"
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 21 mm
$113.28 $120.78Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X350

The B04-SAUD50X350 is an AirTAC double-acting, double-rod profile cylinder. The B04- prefix marks this as the construction-machinery dedicated variant of the SAUD50X350, mechanically identical to the base model. A rod exits both ends on one piston, meaning both faces use the rod-side area. Output force is equal in both directions, delivering 825 N each way at 0.5 MPa. The extruded aluminum profile barrel is shorter than an ISO 15552 cylinder of the same bore.

It features a 1/4" port, M16x1.5 rod thread, and adjustable air cushions at both ends. Without the -S suffix, this SKU lacks a magnet and cannot accept CMSG or DMSG sensors. For high-heat environments, Viton H seals extend the operating range to 150 C.

Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X350 Technical Specifications

ModelAirtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X350
SeriesSAU profile-type cylinder
Bore sizeØ50 mm
Stroke350 mm
Acting typeDouble acting
Port size1/4"
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 21 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X350

SAUProfile-type standard cylinder series.
50Bore size in mm.
×350Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.

Where the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X350 Is Used

construction

Excavator Panel Pusher

Drives cabin panels on heavy equipment using twin rods to prevent twist during the 350 mm extension.

precision_manufacturing

Crane Tool Synchronizer

Carries dual gripping tools on construction machinery where equal push and pull force is mandatory.

settings

Back-End Cam Actuator

Uses the protruding back rod to mechanically trip a limit switch on a heavy-duty assembly fixture.

Is the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X350 the Right Cylinder?

When sizing this 50 mm bore unit, consider the adjacent bores: the 40 mm yields 528 N both ways, while the 63 mm provides 1402 N. Choose this double-rod architecture when your application demands anti-rotation guidance, synchronized twin-tool driving, or needs a back rod to trip a switch. Mounting is limited to Basic, FA flange, and LB foot styles, compatible with the AirTAC SC series. Because this model has a 350 mm stroke, external guides are recommended to prevent rod bending under side loads. Note that a plain cylinder drifts without live air; the cushions only decelerate. Use an external rod lock for held loads.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X350 FAQ

This 50 mm bore cylinder has a 1/4" port and delivers equal force in both directions because both faces lose rod area. It outputs 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and 1484 N at 0.9 MPa. The B04- prefix simply denotes the construction-machinery dedicated variant.

No. Because this SKU lacks the -S suffix, it has no internal magnet and cannot accept CMSG, DMSG, or EMSG switches. You must use external mechanical limit switches, potentially tripped by the rear protruding rod.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAU Cylinders

Request a Quote for Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X350

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for B04-SAUD50X350 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.