
The AirTAC B06-SDA Battery Dedicated Cylinder B06-SDA12X5 is a genuine double-acting COMPACT (thin) air cylinder with a Ø12mm bore and 5mm stroke, M5×0.8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
The AirTAC B06-SDA12X5 is a double-acting, single-rod compact cylinder engineered for battery-manufacturing lines. The leading "B06-" prefix designates this as AirTAC's battery-dedicated variant, mechanically identical to the standard SDA12X5. It delivers a 56.5 N push force at 0.5 MPa and features a 5 mm stroke for ultra-short movements. The riveted body design minimizes axial mounting depth, saving critical machine footprint in dense cell assembly equipment.
This model uses a 6 mm piston rod and an M5x0.8 port. Deceleration at stroke ends relies on a fixed NBR bumper rather than an adjustable air cushion, meaning high-speed approaches may require external shock absorption. Without a piston magnet (-S option omitted), this specific SKU cannot host reed or electronic switches. The hard-anodized bore and two-way piston seal ensure reliable service within the 0.15-1.0 MPa operating pressure range.
| Model | Airtac B06-SDA Battery Dedicated Cylinder B06-SDA12X5 |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø12 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod end thread | M3×0.5 female / M5×0.8 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 50 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 57 N | 42 N |
| 0.7 MPa | 79 N | — |
| Max (@1.0 MPa) | 12 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 12 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Drives the precise 5 mm indexing motion required to align lithium-ion pouch cells within automated stacking towers.
Applies a consistent 56.5 N clamping force at 0.5 MPa to hold battery tabs firmly during ultrasonic welding processes.
Executes short-stroke lateral pushes to seat battery modules into testing trays before formation cycling begins.
If your battery-handling mechanism requires slightly more force, stepping up to the SDA16 increases the 0.5 MPa push to 100.5 N. Confirm your ordering essentials: 12 mm bore, 5 mm stroke, M5x0.8 port, female M3x0.5 rod thread, and no sensor magnet. Note that a plain cylinder drifts when air is lost or the valve is centered; the fixed bumper decelerates the end stop but does not lock the load. To hold a vertical position securely, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
This 12 mm bore double-acting cylinder provides a push force of 56.5 N and a pull force of 42.4 N at 0.5 MPa. At 0.7 MPa, the push is 79.2 N. The theoretical maximum push is 12 kgf at 1.0 MPa, with a proof pressure of 1.5 MPa.
The B06- prefix simply marks this as AirTAC's battery-manufacturing dedicated variant of the SDA12X5, with no mechanical changes to the specs. This specific SKU lacks the -S magnet option, so it cannot accept reed or electronic switches. It uses a fixed NBR bumper for end-stop deceleration, not an adjustable cushion.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.