Airtac SDA Ultra Thin Cylinder SDA12X10
The AirTAC SDA Ultra Thin Cylinder SDA12X10 is a genuine double-acting COMPACT (thin) air cylinder with a Ø12mm bore and 10mm stroke, M5×0.8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
- BoreØ12 mm
- Stroke10 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM3×0.5 (F) / M5×0.8 (B)
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDA Ultra Thin Cylinder SDA12X10
The AirTAC SDA12X10 is a double-acting single-rod compact cylinder engineered for tight spaces. It generates 56.5 N of push force and 42.4 N of pull force at 0.5 MPa, making it suitable for light-duty positioning. The hard-anodized 12 mm bore houses a two-way piston seal, while the M5x0.8 port ensures reliable pneumatic supply.
Its short riveted body significantly reduces axial mounting depth compared to round-body alternatives. End-stopping relies on a fixed NBR bumper rather than an adjustable air cushion, meaning external shock absorbers are recommended for high-energy cycles. This specific SKU lacks a piston magnet, so it cannot support magnetic sensing.
Airtac SDA Ultra Thin Cylinder SDA12X10 Technical Specifications
| Model | Airtac SDA Ultra Thin Cylinder SDA12X10 |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø12 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod end thread | M3×0.5 female / M5×0.8 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 50 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
Theoretical Output Force (Ø12mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 57 N | 42 N |
| 0.7 MPa | 79 N | — |
| Max (@1.0 MPa) | 12 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SDA Ultra Thin Cylinder SDA12X10
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 12 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDA Ultra Thin Cylinder SDA12X10 Is Used
PCB Ejector Pins
Provides the 56.5 N push needed to pop bare printed circuit boards out of testing fixtures without damaging delicate traces.
Lab Sample Diverting
Actuates small gates in automated diagnostic equipment, utilizing the 10 mm stroke to redirect fluid vials down the correct analysis path.
Small Parts Sorting
Pushes lightweight plastic caps off a conveyor belt into packaging bins, benefiting from the minimal axial footprint of the riveted body.
Is the Airtac SDA Ultra Thin Cylinder SDA12X10 the Right Cylinder?
For lower force requirements, stepping down is not an option as 12 mm is the smallest available SDA bore. If your application demands more power, the next size up is the SDA16, which provides 100.5 N of push at 0.5 MPa.
Keep in mind that this unit does not hold its position if air pressure drops or the valve is centered; the piston will drift, and the fixed bumper only decelerates it near the stroke end. For secure load holding, an external rod lock or pilot-operated check valve is required. To order, confirm the 10 mm stroke, M5x0.8 port, female M3x0.5 rod thread, and the absence of the magnet option.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short-body depth vs. a round-body cylinder
- ✓ Port/thread type (PT)
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
- ✓ Side load — avoid on a compact rod
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the short piston rod.
- check Very long strokes are unsuitable for the compact body.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDA Ultra Thin Cylinder SDA12X10 FAQ
At 0.5 MPa, the push force is 56.5 N and the pull force is 42.4 N. At 0.7 MPa, push is 79.2 N and pull is 59.4 N. The theoretical maximum push is 12 kgf at 1.0 MPa. Operating pressure ranges from 0.15-1.0 MPa, with a speed of 30-500 mm/s.
No, this specific SKU does not include a piston magnet, so it cannot trigger AirTAC reed or electronic switches. You would need to order the SDA12X10S variant to enable sensing capabilities.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SDA Ultra Thin Cylinder SDA12X10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.