
The AirTAC B06-SDA Battery Dedicated Cylinder B06-SDA50X30S is a genuine double-acting COMPACT (thin) air cylinder with a Ø50mm bore and 30mm stroke, PT1/4 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
The AirTAC B06-SDA50X30S is a double-acting single-rod compact cylinder delivering 981.7 N of push force and 824.7 N of pull force at 0.5 MPa. The leading B06- prefix marks this as the battery-manufacturing dedicated variant of the SDA50X30S, meaning it is mechanically identical to the base model but curated for cell, module and pack assembly lines. Operating at speeds of 30-500 mm/s, it provides robust actuation for demanding production environments.
Its short riveted body significantly reduces axial mounting depth compared to round-body units, saving valuable machine footprint. The bore is hard-anodized for durability, and the -S suffix indicates a built-in piston magnet for direct mounting of AirTAC reed or electronic switches along the body grooves. End-stopping relies on a fixed NBR bumper rather than an adjustable air cushion, efficiently decelerating the load near stroke end.
| Model | Airtac B06-SDA Battery Dedicated Cylinder B06-SDA50X30S |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Drives the precise horizontal stacking of lithium-ion pouch cells, utilizing the 981.7 N push force to press layers firmly without damaging delicate separators.
Positions battery module busbars and tabs under the welding head, where the short 30 mm stroke and compact body minimize interference with welding torches.
Actuates routing gates on battery pack assembly conveyors, benefiting from the built-in magnet for positive position confirmation during high-speed sorting.
When sizing this actuator, consider stepping down to the SDA40 which provides 628.3 N of push at 0.5 MPa, or stepping up to the SDA63 which yields 1558.6 N. To confirm your ordering essentials: specify the 50 mm bore, 30 mm stroke, PT1/4 port, female M10x1.5 rod thread, and the required -S magnet.
Remember that a standard compact cylinder does not hold its position if air pressure is lost or the valve is centered; the piston will drift. The fixed NBR bumper only decelerates the stroke near its end and acts as neither a lock nor a brake. If your battery-handling fixture must maintain a vertical load during an outage, incorporate an external rod lock or a pilot-operated check valve into the pneumatic circuit.
Quick checklist
This double-acting cylinder generates a push force of 981.7 N and a pull force of 824.7 N at 0.5 MPa. At 0.7 MPa, push increases to 1374.4 N. The theoretical maximum push is 200 kgf at 1.0 MPa. It features a 50 mm bore, 30 mm stroke, PT1/4 port, and a maximum standard stroke limit of 130 mm.
The B06- prefix simply designates this as the battery-manufacturing dedicated variant of the SDA50X30S; it shares the exact same physical specs, seals, and materials as the base model. Regarding end-of-stroke damping, it uses a fixed NBR bumper to decelerate the piston, not a field-adjustable air cushion. For high-energy cycles, you should add an external shock absorber.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.