verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDA Series · Compact Cylinder

Airtac B06-SDA Battery Dedicated Cylinder B06-SDA63X75SB

The AirTAC B06-SDA Battery Dedicated Cylinder B06-SDA63X75SB is a genuine double-acting COMPACT (thin) air cylinder with a Ø63mm bore and 75mm stroke, PT1/4 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.

  • BoreØ63 mm
  • Stroke75 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM10×1.5 (F) / M18×1.5 (B)
  • CushionFixed NBR bumper (both ends)
$82.31 $89.81Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac B06-SDA Battery Dedicated Cylinder B06-SDA63X75SB

The B06-SDA63X75SB is an AirTAC double-acting compact cylinder engineered for battery-manufacturing lines. The leading B06- prefix designates this as a battery-dedicated variant, mechanically identical to the standard SDA63X75SB. It delivers a robust 1558.6 N push and 1401.5 N pull at 0.5 MPa. Its short riveted body minimizes axial footprint, fitting neatly into dense cell assembly stations where standard profile cylinders cannot. This specific unit includes a built-in piston magnet (-S) for position sensing and a male-thread piston rod (-B).

The 63 mm bore uses a PT1/4 port and a 20 mm rod to handle substantial loads. Instead of an adjustable air cushion, a fixed NBR bumper absorbs impact at the stroke ends. This bumper decelerates the piston but is not a locking device; a plain compact cylinder will drift and lose its load if air pressure drops, requiring an external rod lock or pilot-operated check valve for fail-safe holding.

Airtac B06-SDA Battery Dedicated Cylinder B06-SDA63X75SB Technical Specifications

ModelAirtac B06-SDA Battery Dedicated Cylinder B06-SDA63X75SB
SeriesSDA compact (thin) cylinder
Bore sizeØ63 mm
Stroke75 mm
Acting typeDouble acting
Port sizePT1/4
Rod end threadM10×1.5 female / M18×1.5 male (B)
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)
Max standard strokeUp to 120 mm

Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac B06-SDA Battery Dedicated Cylinder B06-SDA63X75SB

SDACompact (thin) double-acting cylinder series.
63Bore size in mm.
×75Stroke length in mm.
SBuilt-in magnet for magnetic-switch position sensing (omit = no magnet).
BMale-thread piston rod (omit = female-thread rod).

Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).

Where the Airtac B06-SDA Battery Dedicated Cylinder B06-SDA63X75SB Is Used

science

Battery Cell Stacking

Applies consistent 1558.6 N pressure to align and stack lithium-ion pouch cells, utilizing the compact riveted body to fit within tight multi-layer production fixtures.

precision_manufacturing

Module Tab Welding

Drives the 20 mm male-threaded rod to clamp battery busbars during ultrasonic welding, ensuring zero lateral shift while the fixed NBR bumper manages the 75 mm stroke impact.

Is the Airtac B06-SDA Battery Dedicated Cylinder B06-SDA63X75SB the Right Cylinder?

When sizing this actuator, step down to the SDA50 which provides 981.7 N push at 0.5 MPa, or step up to the SDA80 yielding 2513.3 N push at 0.5 MPa. To order, confirm the 63 mm bore, 75 mm stroke, PT1/4 port, male M18x1.5 rod thread, and the required magnetic sensor. Note that without live pressure the piston drifts, so vertical applications need a locking mechanism.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short-body depth vs. a round-body cylinder
  • ✓ Port/thread type (PT)
  • ✓ Magnet (S) for sensors?
  • ✓ Female (blank) or male (B) rod thread
  • ✓ Side load — avoid on a compact rod
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the short piston rod.
  • check Very long strokes are unsuitable for the compact body.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac B06-SDA Battery Dedicated Cylinder B06-SDA63X75SB FAQ

This 63 mm bore cylinder generates 1558.6 N push and 1401.5 N pull at 0.5 MPa, increasing to 2182.1 N push and 1962.2 N pull at 0.7 MPa. The theoretical maximum push force is 318 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, runs at 30-500 mm/s, and the 75 mm stroke is within the 130 mm standard limit.

The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated variant, sharing the exact physical specs of the standard SDA63X75SB. The -B suffix means it uses a male M18x1.5 piston rod thread instead of the default female M10x1.5. It also includes a -S magnet for AirTAC reed or electronic switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDA Compact Cylinders

Request a Quote for Airtac B06-SDA Battery Dedicated Cylinder B06-SDA63X75SB

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for B06-SDA63X75SB and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.