
The AirTAC B52-GFR Copper-Free Air Treatment Unit B52-GFR30015JC1WK is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/2" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR30015JC1WK is a G-series filter regulator with a built-in reverse (check) valve, supplied without a mounting bracket. It filters water and particulate, sets downstream pressure, and the check valve helps hold the downstream circuit if upstream supply is lost. This configuration carries a 1/2in PT port, a 5 um filtration element, a differential-pressure drain, and a round external gauge with MPa scale. Regulated range is 0.15-0.9 MPa (20-130 psi); maximum inlet pressure is 1.0 MPa (145 psi).
This is a genuine AirTAC part in the GFR300 size class; the G-series spans sizes 200, 300, 400 and 600, with bracket and no-bracket codes, check-valve fitment, drain types, filter grades and gauge options. Flow figures are published as curves rather than a single rating, so contact us and we will confirm the datasheet figures for your application on request.
| Model | Airtac B52-GFR Copper-Free Air Treatment Unit B52-GFR30015JC1WK |
|---|---|
| Series | GFR300 filter regulator |
| Port size | PT1/2" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · PT1/2" · 5 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-15 (two-unit set) |
Filtered and regulated air on a robot gripper control panel, where the check valve keeps the gripper circuit from venting through the unit during momentary supply dips and the no-bracket code suits direct panel fixing.
Conditioning the supply to pneumatic actuators on laboratory automation such as sample handlers and shuttle mechanisms, with the 5 um element protecting compact valve manifolds and the MPa gauge giving SI-unit setpoints.
Setting a clean, stable pressure for pneumatic thread-tension and lifting cylinders on textile machinery, where the reverse valve supports the loaded circuits and the 1/2in port matches the machine's main drop.
GFR300 gives you a 1/2in PT port; step to 400 or 600 size where flow demand is higher. The K code fits the reverse/check valve for circuits that must resist backflow on supply loss - pick this over the plain unit for loaded or vertical actuators. The J code omits the mounting bracket, for direct plate or frame fixing; the non-J equivalent includes it. Drain is the differential-pressure type on this code; automatic and manual variants exist. The 5 um element (W) covers finer particle removal versus the 40 um standard grade. The round external gauge with MPa scale is fitted. PT thread is standard; G (BSPP) and NPT versions are available to order.
Because flow is published as curves and not a single rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
There is no single rated flow figure for this unit - AirTAC publishes flow as characteristic curves. We will not quote an estimated number; send us your supply pressure and the flow your application needs and we will confirm the sizing from the datasheet on request.
Two decode differences: J means the mounting bracket is omitted, and K means a reverse (check) valve is fitted so downstream pressure is not lost back through the unit on a supply failure. Filter grade (5 um), 1/2in PT port, differential-pressure drain and round MPa gauge are the same as the C1W version.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.